PortablePi v7 para capturas de pantalla
About the PortablePi v7 para capturas de pantalla PCB
PortablePi v7 para capturas de pantalla is an open source AVR/Arduino PCB design by lucahttp, published on GitHub. It is a 2-layer board measuring 101.6 × 141.1 mm, with 60 components from 4 distinct parts.
Its main chip is the ATmega328P-PU, from the AVR/Arduino family. By type, the board carries 57 switches, 1 IC and 1 connector.
From the project
Make your Raspberry Pi portable to edit your code anywhere
Is a Father Board witch can connect to the raspberry pi (currently compatible to this gpio configuration, orange pi thinkercard, an anothers) this aport an Screen and keyboard (on one board) then i will add more things like audio jack, ethernet port, hub USB and everything you can imagine and put in your pockets.
everything looked like fine until the company that makes CHIP, declared bankrupt.
Main components on the PortablePi v7 para capturas de pantalla
PortablePi v7 para capturas de pantalla bill of materials (BOM)
60 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328P-PU | DIP-28_W7.62mm | U1 |
| 1 | AudioJack3 | Jack_3.5mm_Ledino_KB3SPRS_Horizontal | J1 |
| 1 | 3.5_Inch_RPI | 3.5 inch RPi LCD | DS1 |
| 57 | SW_Push | SW_PUSH_6mm | SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 +49 |
PortablePi v7 para capturas de pantalla design files
The KiCad project lives in the lucahttp/PortablePi repository on GitHub; these links point at the commit this page was built from.
PortablePi v7 para capturas de pantalla: common questions
What microcontroller does the PortablePi v7 para capturas de pantalla use?
The PortablePi v7 para capturas de pantalla is built around the ATmega328P-PU, from the AVR/Arduino family.
How big is the PortablePi v7 para capturas de pantalla PCB?
The PortablePi v7 para capturas de pantalla measures 101.6 × 141.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PortablePi v7 para capturas de pantalla?
60 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the PortablePi v7 para capturas de pantalla design files?
From the lucahttp/PortablePi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PortablePi v7 para capturas de pantalla design in my own project?
The repository has no license, so all rights stay with lucahttp. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PortablePi v7 para capturas de pantalla without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in PortablePi
Raspberry PiPortablePi v89
109.2 × 158.7 mm72 parts2LNo license2
Raspberry PiSin nombre v8 spin off
101.6 × 141.1 mm61 parts2LNo license2
Raspberry PiSin nombre v8
101.6 × 141.1 mm61 parts2LNo license2
AVR/ArduinoPortablePi v4 USBKeyborad from zero
159.6 × 138.4 mm58 parts2LNo license2
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoModuleV450
stuartpittaway
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoV4
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k