HardLabs

PortablePi v89

lucahttp·PortablePi·piportable v7.2/portablePi v89.kicad_pcb

PortablePi v89 PCB layout, top view — open source Raspberry Pi board by lucahttp

About the PortablePi v89 PCB

PortablePi v89 is an open source Raspberry Pi PCB design by lucahttp, published on GitHub. It is a 2-layer board measuring 109.2 × 158.7 mm, with 72 components from 6 distinct parts.

Its main chip is the Raspberry_Pi_Zero_W_(v1.3), from the Raspberry Pi family. Other key parts include the PCF8574. By type, the board carries 57 switches, 10 diodes, 3 ICs and 1 connector.

From the project

Make your Raspberry Pi portable to edit your code anywhere

Is a Father Board witch can connect to the raspberry pi (currently compatible to this gpio configuration, orange pi thinkercard, an anothers) this aport an Screen and keyboard (on one board) then i will add more things like audio jack, ethernet port, hub USB and everything you can imagine and put in your pockets.

everything looked like fine until the company that makes CHIP, declared bankrupt.

PortablePi v89, from the project README
From the project README

Main components on the PortablePi v89

Raspberry_Pi_Zero_W_(v1.3)PCF8574

PortablePi v89 bill of materials (BOM)

72 components, 6 distinct parts.

QtyPartRefs
1
Raspberry_Pi_Zero_W_(v1.3)
IC1
2
PCF8574
U2, U3
1
AudioJack3
J1
1
3.5_Inch_RPI
DS1
57
SW_Push
SW0, SW1, SW2, SW3, SW4, SW5, SW6, SW7 +49
10
1N4148
D1, D2, D3, D4, D5, D6, D7, D8 +2

PortablePi v89 design files

The KiCad project lives in the lucahttp/PortablePi repository on GitHub; these links point at the commit this page was built from.

PortablePi v89: common questions

What microcontroller does the PortablePi v89 use?

The PortablePi v89 is built around the Raspberry_Pi_Zero_W_(v1.3), from the Raspberry Pi family.

How big is the PortablePi v89 PCB?

The PortablePi v89 measures 109.2 × 158.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PortablePi v89?

72 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the PortablePi v89 design files?

From the lucahttp/PortablePi repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PortablePi v89 design in my own project?

The repository has no license, so all rights stay with lucahttp. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PortablePi v89 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

More boards in PortablePi

Earlier revisions in the repo: portablePi v88, portablePi v87, portablePi v86, portablePi v85, portablePi v84, portablePi v83, portablePi v82, portablePi v7

Similar boards