HardLabs

Intercons

LuHer10·LARA·pcb/intercons/intercons.kicad_pcb

Intercons PCB layout, top view — open source board by LuHer10

About the Intercons PCB

Intercons is an open source PCB design by LuHer10, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 77.8 × 84.6 mm, with 16 components from 16 distinct parts.

Other key parts include the BAT_CHRG and 12V_5V_BUCK. By type, the board carries 8 connectors, 3 diodes, 2 modules, 1 switch, 1 capacitor and 1 resistor.

It belongs with the robotics & motion designs in this gallery.

From the project

LARA: Low-cost Assistive Robot Arm

Main components on the Intercons

BAT_CHRG12V_5V_BUCK

Intercons bill of materials (BOM)

16 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
BAT_CHRG
A1
1
12V_5V_BUCK
A2
1
COMM_OUT
J1
1
COMM_PSU
J2
1
COMM_BAT
J3
1
PSU
J4
1
BATTERY
J5
1
RoboClaw1
J6
1
RoboClaw2
J7
1
U2D2
J8
1
PWR_SWITCH
SW1
1
D_BAT
D1
1
D_RPi
D2
1
STATUS_LED
D3
1
C_RPi
C1
1
R_LED
R1

Intercons design files

The KiCad project lives in the LuHer10/LARA repository on GitHub; these links point at the commit this page was built from.

Intercons: common questions

How big is the Intercons PCB?

The Intercons measures 77.8 × 84.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Intercons?

16 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Intercons design files?

From the LuHer10/LARA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Intercons design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in LARA

Similar boards