HardLabs

Intercons2

LuHer10·LARA·pcb/intercons2/intercons2.kicad_pcb

Intercons2 PCB layout, top view — open source board by LuHer10

About the Intercons2 PCB

Intercons2 is an open source PCB design by LuHer10, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 77.8 × 84.6 mm, with 13 components from 13 distinct parts.

Other key parts include the BAT_CHRG. By type, the board carries 5 connectors, 3 diodes, 1 IC, 1 module, 1 switch and 1 capacitor.

It belongs with the robotics & motion designs in this gallery.

From the project

LARA: Low-cost Assistive Robot Arm

Main components on the Intercons2

BAT_CHRG

Intercons2 bill of materials (BOM)

13 components, 13 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
~
U1
1
BAT_CHRG
A1
1
PSU
J1
1
BATTERY
J2
1
Raspberry
J3
1
RoboClaw1
J4
1
RoboClaw2
J5
1
PWR_SWITCH
SW1
1
D_BAT
D1
1
D_RPi
D2
1
STATUS_LED
D3
1
C_RPi
C1
1
R_LED
R1

Intercons2 design files

The KiCad project lives in the LuHer10/LARA repository on GitHub; these links point at the commit this page was built from.

Intercons2: common questions

How big is the Intercons2 PCB?

The Intercons2 measures 77.8 × 84.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Intercons2?

13 components, from 13 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Intercons2 design files?

From the LuHer10/LARA repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Intercons2 design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in LARA

Similar boards