E32-900T30S
About the E32-900T30S PCB
E32-900T30S is an open source PCB design by LuizFernandoOliveira, published on GitHub. It is a 2-layer board measuring 44.9 × 47.8 mm, with 9 components from 7 distinct parts.
Other key parts include the TPS7A0233DBVR. By type, the board carries 3 connectors, 2 ICs, 2 capacitors and 2 resistors.
It belongs with the dev boards & breakouts, rf & radio and iot & wireless designs in this gallery.
From the project
LoRa IoT Module
Electronic circuit designed to communicate between the E32-900T30S module and a microcontrolled/embedded system.
- The J1 connector is designed to fit into a Raspberry Pi. - The J2 connector was designed to be used on a breadboard. - The J3 connector was designed to be used with other projects (by the author) that have this type of connector. - The control signal "LORAON" allows turning the module on and off. - The GNDON control signal is a signal sent from another board that enables/disables the board's GND. In this case, resistor R1 must be soldered. If you don't need to control the…
Main components on the E32-900T30S
E32-900T30S bill of materials (BOM)
9 components, 7 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPS7A0233DBVR | SOT-23-5 | U1 |
| 1 | ~ | E32-900T30S | U2 |
| 1 | RPi | PinSocket_2x06_P2.54mm_Vertical | J1 |
| 1 | Protoboard | PinHeader_1x09_P2.54mm_Horizontal | J2 |
| 1 | GENERIC_CONN | PinSocket_2x07_P2.54mm_Vertical | J3 |
| 2 | 1u | C_0805_2012Metric | C1, C2 |
| 2 | 0R | R_0805_2012Metric | R1, R2 |
E32-900T30S design files
The KiCad project lives in the LuizFernandoOliveira/E32-900T30S repository on GitHub; these links point at the commit this page was built from.
- LayoutKICAD_PCB/KICAD_PCB.kicad_pcb
- SchematicKICAD_PCB/KICAD_PCB.kicad_sch
E32-900T30S: common questions
How big is the E32-900T30S PCB?
The E32-900T30S measures 44.9 × 47.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the E32-900T30S?
9 components, from 7 distinct parts. The full bill of materials is listed on this page.
Where can I download the E32-900T30S design files?
From the LuizFernandoOliveira/E32-900T30S repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the E32-900T30S design in my own project?
The repository has no license, so all rights stay with LuizFernandoOliveira. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
Eecv breakout
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k