7 open source boards using the TPS7A0233DBVR
Real designs built with the TPS7A0233DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Plume
theohg
90 × 60 mm257 parts8LNo license0
V2
Jaydosu
430 × 117.8 mm252 parts2LNo license0
STM32Family lace
SomniumUrani
46.5 × 55.5 mm51 parts4LNo license0
E32-900T30S
LuizFernandoOliveira
44.9 × 47.8 mm9 parts2LNo license0
E32-900T20S
30 × 31.9 mm6 parts2LNo license0
V2.3
430 × 118.4 mm252 parts2LNo license0
STM32Family monitor
20.5 × 41.2 mm33 parts4LNo license0
How designs wire the TPS7A0233DBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS7A0233DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The OUT pin is tied to 3.3V on 5 of 5 designs.
- The IN pin is tied to 5V on 3 of 5 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| INpin 1 | Connected to: 5V 60% · a signal 40% | — |
| GNDpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Not connected 80% · GND 20% | — |
| OUTpin 5 | Connected to: 3.3V 100% | — |
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include V2 by Jaydosu, E32-900T20S by LuizFernandoOliveira, E32-900T30S by LuizFernandoOliveira and Family lace by SomniumUrani.
The TPS7A0233DBVR in open source designs
The gallery holds 7 open source boards using the TPS7A0233DBVR from 5 GitHub repositories; a typical one measures about 46.5 × 55.5 mm and carries around 51 components.
57% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Plume by theohg.
Microcontrollers on boards using the TPS7A0233DBVR
What boards using the TPS7A0233DBVR are built for
TPS7A0233DBVR: common questions
Where can I find a TPS7A0233DBVR reference design?
Each of the 7 boards on this page is a real design using the TPS7A0233DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TPS7A0233DBVR OUT pin connected?
The OUT pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TPS7A0233DBVR.
How is the TPS7A0233DBVR IN pin connected?
The IN pin is tied to 5V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TPS7A0233DBVR.
Which microcontrollers do boards using the TPS7A0233DBVR use?
Most are built on STM32 (3).
How big is a typical board using the TPS7A0233DBVR?
The median is 46.5 × 55.5 mm, and 57% are two-layer designs.
What is the most popular open source board using the TPS7A0233DBVR?
By GitHub stars, Plume by theohg, with 0 stars.
Can I simulate one of these boards using the TPS7A0233DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.