PCB1
About the PCB1 PCB
PCB1 is an open source PCB design by lukasloetkolben, published on GitHub under the MIT license. It is a 4-layer board measuring 22.4 × 46.8 mm, with 5 components from 5 distinct parts.
From the project
If you have any questions contact me on Discord: elkoled
PCB1 bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | to_car_1 | ESW-110-44-F-D | J4 |
| 1 | to_car_2 | ESW-110-44-F-D | J5 |
| 1 | to_car_3 | ESW-110-44-F-D | J6 |
| 1 | B2B_1 | SAMTEC_TW-10-X-X-T-X-X | J10 |
| 1 | B2B_2 | SAMTEC_TW-10-X-X-T-X-X | J11 |
PCB1 design files
The KiCad project lives in the lukasloetkolben/OpenpilotHardware repository on GitHub; these links point at the commit this page was built from.
PCB1: common questions
How big is the PCB1 PCB?
The PCB1 measures 22.4 × 46.8 mm, has 4 copper layers and is 1.69 mm thick.
How many components are on the PCB1?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PCB1 design files?
From the lukasloetkolben/OpenpilotHardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the PCB1 design in my own project?
Yes, under the terms of its MIT license, which lukasloetkolben chose for the repository.
More boards in OpenpilotHardware
STM32Uno
103.2 × 74.1 mm131 parts2LMIT92
STM32BlackPanda
47.5 × 41.7 mm86 parts4LMIT92
PSA-Harness
28.3 × 54 mm20 parts4LMIT92
PCB2
28.3 × 54 mm15 parts4LMIT92
HarnessBox
30.5 × 30.4 mm13 parts2LMIT92
J533Dream
32 × 50 mm10 parts4LMIT92
Riser
10 × 21 mm4 parts2LMIT92