NeonPine
lukmatuska·NeonPine
About the NeonPine PCB
NeonPine is an open source RISC-V PCB design by lukmatuska, published on GitHub. It is a 2-layer board measuring 54.7 × 69 mm, with 98 components from 33 distinct parts.
Its main chip is the CH32V003F4P6, from the RISC-V family. Other key parts include the 74HC595BQ. By type, the board carries 53 resistors, 12 transistors, 9 capacitors, 5 diodes, 3 ICs and 2 connectors.
From the project
christmas desktop light with real neon lamps
Main components on the NeonPine
NeonPine bill of materials (BOM)
98 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH32V003F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 2 | 74HC595BQ | DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm_EPGND | U2, U3 |
| 1 | DMN15H310SE | SOT-223-3_TabPin2 | Q1 |
| 1 | TEPT4400 | LED_D3.0mm | Q2 |
| 10 | MMDT5551 | SOT-363_SC-70-6 | Q11, Q12, Q13, Q14, Q15, Q16, Q17, Q18 +2 |
| 1 | USB-C 16P (USB4105-GF-A) | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | SWD pogo pads | Pogo_1x03_P2.54mm | J2 |
| 1 | PTC 0.5A (MF-NSMF050-2) | Fuse_1206_3216Metric | F1 |
| 10 | NEON-3 | Lamp_Neon_Brightmaster_NEON-3_D4x10_P3.0 | LA1, LA2, LA3, LA4, LA5, LA6, LA7, LA8 +2 |
| 1 | Touch trunk | TouchPad_D4.0mm_Masked | TP2 |
| 1 | 200V 1A fast SOD-123F (verify P/N) | D_SOD-123F | D1 |
| 1 | SMF100A | D_SOD-123F | D2 |
| 1 | SMF5.0A (TVS) | D_SOD-123F | D3 |
| 2 | BZX884-C3V6 | D_SOD-882 | D4, D5 |
| 1 | 600R@100MHz | L_0603_1608Metric | FB1 |
| 1 | 330u (SWPA6028S331MT, Isat>=0.4A) | L_6.3x6.3_H3 | L11 |
| 1 | 10U 10u | C_0603_1608Metric | C1 |
| 4 | 100N 100n | C_0402_1005Metric | C2, C6, C9, C10 |
| 1 | 22u 10V | C_0805_2012Metric | C3 |
| 1 | 1u 250V | C_1210_3225Metric | C4 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10N 10n | C_0402_1005Metric | C5 |
| 1 | 100p C0G 250V | C_0805_2012Metric | C8 |
| 1 | 47 | R_0402_1005Metric | R1 |
| 1 | 100K 100k | R_0402_1005Metric | R2 |
| 2 | 5K1 5k1 | R_0402_1005Metric | R3, R4 |
| 2 | 1M | R_0603_1608Metric | R5, R6 |
| 1 | 39K 39k | R_0402_1005Metric | R7 |
| 21 | 22K 22k | R_0402_1005Metric | R9, R41, R42, R43, R44, R45, R46, R47 +13 |
| 1 | 1k | R_0402_1005Metric | R11 |
| 1 | 100 (snubber) | R_0805_2012Metric | R12 |
| 2 | 68 | R_0402_1005Metric | R13, R14 |
| 1 | 1K5 1k5 | R_0402_1005Metric | R15 |
| 20 | 150k 200V | R_0603_1608Metric | R21, R22, R23, R24, R25, R26, R27, R28 +12 |
NeonPine design files
The KiCad project lives in the lukmatuska/NeonPine repository on GitHub; these links point at the commit this page was built from.
- LayoutNeonPine.kicad_pcb
- SchematicNeonPine.kicad_sch
- BOMfab/NeonPine-bom.csv
NeonPine: common questions
What microcontroller does the NeonPine use?
The NeonPine is built around the CH32V003F4P6, from the RISC-V family.
How big is the NeonPine PCB?
The NeonPine measures 54.7 × 69 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the NeonPine?
98 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the NeonPine design files?
From the lukmatuska/NeonPine repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the NeonPine design in my own project?
The repository has no license, so all rights stay with lukmatuska. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the NeonPine without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105