9 open source boards using the 74HC595BQ

Real designs built with the 74HC595BQ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the 74HC595BQ

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74HC595BQ connects to, and the resistors, capacitors and other passives placed on it.

  • The QB_1 pin has a series resistor on 4 of 6 designs, most often 1 kΩ (then 56 Ω).
  • The VCC_16 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF).
  • The QC_2 pin has a series resistor on 3 of 6 designs, most often 56 Ω (then 22 kΩ).
  • The QD_3 pin has a series resistor on 3 of 6 designs, most often 56 Ω (then 22 kΩ).
QB_1pin 1Connected to: Signal 100%
  • Series resistor on 67% · 1 kΩ (1), 56 Ω (1), 22 kΩ (1)
QC_2pin 2Connected to: Signal 100%
  • Series resistor on 50% · 56 Ω (1), 22 kΩ (1), 82 Ω (1)
QD_3pin 3Connected to: Signal 100%
  • Series resistor on 50% · 56 Ω (1), 22 kΩ (1), 130 Ω (1)
QE_4pin 4Connected to: Signal 67% · not connected 17% · GND 17%
  • Series resistor on 33% · 56 Ω (1), 22 kΩ (1)
QF_5pin 5Connected to: Signal 100%
  • Series resistor on 50% · 56 Ω (1), 22 kΩ (1), 82 Ω (1)
QG_6pin 6Connected to: Signal 83% · not connected 17%
  • Series resistor on 33% · 56 Ω (1), 22 kΩ (1)
QH_7pin 7Connected to: Signal 100%
  • Series resistor on 50% · 56 Ω (1), 22 kΩ (1), 360 Ω (1)
GND_8pin 8Connected to: GND 67% · 3.3V 17% · a signal 17%
SRCLR_10pin 10Connected to: 74HC595BQ 40% · 3.3V 40%
  • Capacitor to GND on 60% · 4.7 µF (6), 100 nF (2)
OE_13pin 13Connected to: GND 60% · a signal 40%
QA_15pin 15Connected to: Signal 80% · not connected 20%
  • Series resistor on 40% · 56 Ω (1), 22 kΩ (1)
VCC_16pin 16Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 80% · 100 nF (6), 4.7 µF (5)
GND_17pin 17Connected to: GND 75% · a signal 25%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Poly corne split42 left2 by thpoll83, TiNRS Wobbler2 by ThisIsNotRocketScience, NeonPine by lukmatuska and Panel by ItsShadowCone.

The 74HC595BQ in open source designs

The gallery holds 9 open source boards using the 74HC595BQ from 6 GitHub repositories; a typical one measures about 130.1 × 106.5 mm and carries around 164 components.

56% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Poly corne split42 right2 by thpoll83.

Microcontrollers on boards using the 74HC595BQ

74HC595BQ: common questions

Where can I find a 74HC595BQ reference design?

Each of the 9 boards on this page is a real design using the 74HC595BQ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 74HC595BQ QB_1 pin?

The QB_1 pin has a series resistor on 4 of 6 designs, most often 1 kΩ (then 56 Ω). Counted from the KiCad layouts of 6 open source designs using the 74HC595BQ.

What decoupling capacitors do designs use on the 74HC595BQ VCC_16 pin?

The VCC_16 pin has a decoupling capacitor on 4 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 6 open source designs using the 74HC595BQ.

What resistor goes on the 74HC595BQ QC_2 pin?

The QC_2 pin has a series resistor on 3 of 6 designs, most often 56 Ω (then 22 kΩ). Counted from the KiCad layouts of 6 open source designs using the 74HC595BQ.

Which microcontrollers do boards using the 74HC595BQ use?

Most are built on RP2040/RP2350 (4), PIC (1), RISC-V (1) and STM32 (1).

How big is a typical board using the 74HC595BQ?

The median is 130.1 × 106.5 mm, and 56% are two-layer designs.

What is the most popular open source board using the 74HC595BQ?

By GitHub stars, Poly corne split42 right2 by thpoll83, with 406 stars.

Can I simulate one of these boards using the 74HC595BQ before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part