FairCharm
Lupix111·FairCharm
About the FairCharm PCB
FairCharm is an open source ESP32 PCB design by Lupix111, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 76.5 × 27.2 mm, with 10 components from 10 distinct parts.
Its main chip is the ESP32-CAM AI THINKER, from the ESP32 family. By type, the board carries 2 switches, 2 resistors, 1 IC, 1 connector, 1 buzzer and 1 diode.
It belongs with the power & battery and iot & wireless designs in this gallery.
From the project
A pocket camera that fits in your palm and can hang from your bag like a charm! It's fair because it's open-source and free for everyone.
A pocket camera that fits in your palm and can hang from your bag like a charm! It's fair because it's open-source and free for everyone. The open camera you actually own.
The people at PCBWay decided to help me out with the printed circuit board, shoutout to Aran and the fine people that work at PCBWay, they're providing me with a tight and clean PCB that will make this project free of any tangled and messed up wirenest. Go to PCBWay to get the PCB for the best price ever!
Main components on the FairCharm
FairCharm bill of materials (BOM)
10 components, 10 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-CAM AI THINKER | test-esp32-cam | MCU1 |
| 1 | Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | Buzzer | MLT-5020 | BZ1 |
| 1 | CKCS PB0A | CKCS PB0A | CH1 |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | SW_Push Shutter | PinHeader_1x02_P2.54mm_Vertical | SW2 |
| 1 | D | D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | C_Pol 330u | CP_Elec_6.3x5.4_Nichicon | C1 |
| 1 | 100-330 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R1 |
| 1 | 10K | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R2 |
FairCharm design files
The KiCad project lives in the Lupix111/FairCharm repository on GitHub; these links point at the commit this page was built from.
- LayoutFairCharm.kicad_pcb
- SchematicFairCharm.kicad_sch
FairCharm: common questions
What microcontroller does the FairCharm use?
The FairCharm is built around the ESP32-CAM AI THINKER, from the ESP32 family.
How big is the FairCharm PCB?
The FairCharm measures 76.5 × 27.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the FairCharm?
10 components, from 10 distinct parts. The full bill of materials is listed on this page.
Where can I download the FairCharm design files?
From the Lupix111/FairCharm repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the FairCharm design in my own project?
Yes, under the terms of its GPL-3.0 license, which Lupix111 chose for the repository.
Can I test firmware for the FairCharm without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k