Buck converter lm2596 13V
About the Buck converter lm2596 13V PCB
Buck converter lm2596 13V is an open source PCB design by m0in92, published on GitHub. It is a 2-layer board measuring 41 × 48.1 mm, with 10 components from 9 distinct parts.
Other key parts include the LM2596TADJG. By type, the board carries 3 capacitors, 2 connectors, 2 resistors, 1 IC, 1 diode and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Kicad schematics and PCB for common electric circuits
Main components on the Buck converter lm2596 13V
Buck converter lm2596 13V bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596TADJG | TO170P470X1016X2092-5P | U1 |
| 2 | Conn_01x02 | TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J1, J2 |
| 1 | 1N5820 | D_DO-201AD_P15.24mm_Horizontal | D1 |
| 1 | 150u | KM3_0 | L1 |
| 1 | 330u | CP_Radial_D8.0mm_P5.00mm | C1 |
| 1 | 100u | CP_Radial_D8.0mm_P5.00mm | C3 |
| 1 | 1.5n | C_0805_2012Metric | C4 |
| 1 | 9k | R_1206_3216Metric | R1 |
| 1 | 1k | R_1206_3216Metric | R2 |
Buck converter lm2596 13V design files
The KiCad project lives in the m0in92/common_pcb_circuits repository on GitHub; these links point at the commit this page was built from.
Buck converter lm2596 13V: common questions
How big is the Buck converter lm2596 13V PCB?
The Buck converter lm2596 13V measures 41 × 48.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck converter lm2596 13V?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Buck converter lm2596 13V design files?
From the m0in92/common_pcb_circuits repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Buck converter lm2596 13V design in my own project?
The repository has no license, so all rights stay with m0in92. Use it as a reference, and ask the author before reusing the design.
More boards in common_pcb_circuits
STM32MCU stm32L05
37 × 32 mm30 parts4LNo license1
AVR/ArduinoMCU ATMEGA328p minimum
48.5 × 76.8 mm21 parts2LNo license1
Usb to uart ft232rl
20 × 32.3 mm14 parts4LNo license1
Buck converter lm2596 5V
47 × 53.9 mm10 parts2LNo license1
Voltage regulator 3V3 ap2210
27.3 × 35 mm7 parts2LNo license1
Voltage regulator 5V ap2210
27.3 × 35 mm7 parts2LNo license1
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Module 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
TemperaturePCB PANEL
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
ProgrammingAdapter
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k