MAGLabs-2017-Badges
About the MAGLabs-2017-Badges PCB
MAGLabs-2017-Badges is an open source ESP8266 PCB design by magfest, published on GitHub. It is a 2-layer board measuring 70 × 120 mm, with 37 components from 20 distinct parts.
Its main chip is the ESP12E, from the ESP8266 family. By type, the board carries 10 diodes, 8 switches, 7 resistors, 4 capacitors, 3 connectors and 2 battery holders.
Main components on the MAGLabs-2017-Badges
MAGLabs-2017-Badges bill of materials (BOM)
37 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP12E | ESP12E | U1 |
| 1 | LCD Screen | Pin_Header_Straight_1x06_Pitch2.54mm | J1 |
| 1 | IR Sensor | VALVE_CHICKLET_8_1 | J2 |
| 1 | Program | Pin_Header_Straight_1x05_Pitch2.54mm | J3 |
| 2 | Battery_Cell | Elecrow-ThroughHole-AA-Battery | BT1, BT2 |
| 1 | LOGO | maglabs-backv2 | G1 |
| 1 | LOGO | maglabs-frontv2 | G2 |
| 1 | Up | PTS645 | S1 |
| 1 | Down | PTS645 | S2 |
| 1 | Left | PTS645 | S3 |
| 1 | Right | PTS645 | S4 |
| 1 | A | PTS645 | S5 |
| 1 | B | PTS645 | S6 |
| 1 | Start/Program | PTS645 | S7 |
| 1 | Select | PTS645 | S8 |
| 6 | D | D_SOD-323 | D1, D2, D3, D8, D9, D10 |
| 4 | WS2812B | WS2812B | D4, D5, D6, D7 |
| 2 | 10u | C_0603 | C1, C2 |
| 2 | 0.1u | C_0603 | C3, C4 |
| 7 | 10k | R_0603 | R1, R2, R3, R4, R5, R6, R7 |
MAGLabs-2017-Badges design files
The KiCad project lives in the magfest/MAGLabs-2017-Badges repository on GitHub; these links point at the commit this page was built from.
MAGLabs-2017-Badges: common questions
What microcontroller does the MAGLabs-2017-Badges use?
The MAGLabs-2017-Badges is built around the ESP12E, from the ESP8266 family.
How big is the MAGLabs-2017-Badges PCB?
The MAGLabs-2017-Badges measures 70 × 120 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MAGLabs-2017-Badges?
37 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the MAGLabs-2017-Badges design files?
From the magfest/MAGLabs-2017-Badges repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the MAGLabs-2017-Badges design in my own project?
The repository has no license, so all rights stay with magfest. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MAGLabs-2017-Badges without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
Kaldek
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Goatgdo
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398