HardLabs

NanoControl F031 Platform (2)

MAHESH-THILAK-K·ADDITIONAL-PROJECT·NanoControl F031 Platform/NanoControl F031 Platform (2).kicad_pcb

NanoControl F031 Platform (2) PCB layout, top view — open source STM32 board by MAHESH-THILAK-K

About the NanoControl F031 Platform (2) PCB

NanoControl F031 Platform (2) is an open source STM32 PCB design by MAHESH-THILAK-K, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 17.8 × 33 mm, with 21 components from 17 distinct parts.

Its main chip is the STM32F031K6, from the STM32 family. Other key parts include the AP2210. By type, the board carries 10 capacitors, 3 connectors, 2 ICs, 2 diodes, 2 resistors and 1 crystal.

From the project

📡 Overview · ✨ Features · 🔩 Architecture · 📐 Pinout · 📦 BOM · 🚀 Quickstart · 📁 File Tree · 🗺 Roadmap · 🤝 Contribute

📡 Overview · ✨ Features · 🔩 Architecture · 📐 Pinout · 📦 BOM · 🚀 Quickstart · 📁 File Tree · 🗺 Roadmap · 🤝 Contribute

NanoControl F031 Platform is a precision-engineered, ultra-compact 32-bit microcontroller platform built around the STM32F031K6T6 — a cost-optimized ARM Cortex-M0+ MCU running at 48 MHz with 32 KB Flash and 4 KB SRAM. Designed for space-constrained embedded control, sensor interfacing, motor drive, and IoT edge nodes, NanoControl delivers full 32-bit processing power in a 32-pin LQFP footprint smaller than a postage stamp.

Main components on the NanoControl F031 Platform (2)

AP2210STM32F031K6

NanoControl F031 Platform (2) bill of materials (BOM)

21 components, 17 distinct parts.

QtyPartRefs
1
AP2210
U1
1
STM32F031K6
U2
1
8MHz
Y1
1
GPIO1
J1
1
Prog
J2
1
GPIO2
J3
1
Reset
SW1
1
Schottky
D1
1
Power_On?
D2
1
10uF
C1
2
4.7uF
C2, C3
3
100nF
C4, C9, C10
2
20pF
C5, C8
1
10nF
C6
1
1uF
C7
1
RLED
R1
1
FBead
R2

NanoControl F031 Platform (2) design files

The KiCad project lives in the MAHESH-THILAK-K/ADDITIONAL-PROJECT repository on GitHub; these links point at the commit this page was built from.

NanoControl F031 Platform (2): common questions

What microcontroller does the NanoControl F031 Platform (2) use?

The NanoControl F031 Platform (2) is built around the STM32F031K6, from the STM32 family.

How big is the NanoControl F031 Platform (2) PCB?

The NanoControl F031 Platform (2) measures 17.8 × 33 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the NanoControl F031 Platform (2)?

21 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the NanoControl F031 Platform (2) design files?

From the MAHESH-THILAK-K/ADDITIONAL-PROJECT repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the NanoControl F031 Platform (2) design in my own project?

Yes, under the terms of its Apache-2.0 license, which MAHESH-THILAK-K chose for the repository.

Can I test firmware for the NanoControl F031 Platform (2) without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in ADDITIONAL-PROJECT

Similar boards