HardLabs

INEVITABLE IN PICO

MAHESH-THILAK-K·ADDITIONAL-PROJECT·Innevitable_PICO/Innevitable Pico.kicad_pcb

INEVITABLE IN PICO PCB layout, top view — open source RP2040/RP2350 board by MAHESH-THILAK-K

About the INEVITABLE IN PICO PCB

INEVITABLE IN PICO is an open source RP2040/RP2350 PCB design by MAHESH-THILAK-K, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 45.2 × 93.4 mm, with 31 components from 14 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, USBLC6-2SC6 and XC6206PxxxMR-Regulator_Linear. By type, the board carries 17 capacitors, 7 resistors, 4 ICs, 1 crystal, 1 connector and 1 fuse.

It belongs with the displays & leds designs in this gallery.

From the project

Innevitable Pico An RP2040-based handheld gaming console featuring a color LCD display, external storage, audio output, battery operation, and USB-C connectivity.

Innevitable Pico An RP2040-based handheld gaming console featuring a color LCD display, external storage, audio output, battery operation, and USB-C connectivity.

Overview Innevitable Pico is a custom handheld console built around the Raspberry Pi RP2040 microcontroller. The project integrates graphics, audio, storage, power management, and user input into a compact portable platform. The hardware is designed to support gaming applications, graphical user interfaces, multimedia playback, and custom firmware development.

Main components on the INEVITABLE IN PICO

W25Q128JVSUSBLC6-2SC6RP2040XC6206PxxxMR-Regulator_Linear

INEVITABLE IN PICO bill of materials (BOM)

31 components, 14 distinct parts.

QtyPartRefs
1
W25Q128JVS
U1
1
USBLC6-2SC6
U2
1
RP2040
U3
1
XC6206PxxxMR-Regulator_Linear
U4
1
12MHz
Y1
1
USB_C_Receptacle_USB2.0
J1
1
500mA
F1
10
100nF
C1, C5, C6, C9, C10, C11, C12, C13 +2
2
22pF
C2, C3
4
1uF
C4, C8, C16, C17
1
10uF
C7
3
1k
R1, R2, R7
2
5k1
R3, R4
2
27R
R5, R6

INEVITABLE IN PICO design files

The KiCad project lives in the MAHESH-THILAK-K/ADDITIONAL-PROJECT repository on GitHub; these links point at the commit this page was built from.

INEVITABLE IN PICO: common questions

What microcontroller does the INEVITABLE IN PICO use?

The INEVITABLE IN PICO is built around the RP2040, from the RP2040/RP2350 family.

How big is the INEVITABLE IN PICO PCB?

The INEVITABLE IN PICO measures 45.2 × 93.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the INEVITABLE IN PICO?

31 components, from 14 distinct parts. The full bill of materials is listed on this page.

Where can I download the INEVITABLE IN PICO design files?

From the MAHESH-THILAK-K/ADDITIONAL-PROJECT repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the INEVITABLE IN PICO design in my own project?

Yes, under the terms of its Apache-2.0 license, which MAHESH-THILAK-K chose for the repository.

Can I test firmware for the INEVITABLE IN PICO without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in ADDITIONAL-PROJECT

Similar boards