Adafruit Feather USB-C

makeristic·Adafruit_Feather_USB-C

Adafruit Feather USB-C PCB layout, top view — open source board by makeristic

About the Adafruit Feather USB-C PCB

Adafruit Feather USB-C is an open source PCB design by makeristic, published on GitHub under the Custom license license. It is a 2-layer board measuring 52.5 × 22.9 mm, with 4 components from 4 distinct parts.

It belongs with the power & battery and dev boards & breakouts designs in this gallery.

From the project

KiCad 5 template for USB-C Adafruit Feather-compatible boards with JST PH battery connector, headers, and mounting holes.

A KiCad project template for designing USB-C boards around the Adafruit Feather specification. It includes the board outline, mounting holes, 12-pin and 16-pin headers, a USB-C receptacle, and a two-pin JST PH battery connector.

This is a starting layout, with no routed PCB tracks. USB-C VBUS and ground are assigned in the schematic, while USB data and CC connections remain unconnected. Add the required USB-C termination, power circuitry, controller, and application circuit before fabrication. The checked-in PCB was saved by KiCad 5.1.6; its legacy schematic and project formats are retained.…

Adafruit Feather USB-C, from the project README
From the project README

Adafruit Feather USB-C bill of materials (BOM)

4 components, 4 distinct parts.

QtyPartRefs
1
Conn_Battery
J1
1
USB_C_Receptacle_USB2.0
J2
1
Conn_Left
J3
1
Conn_Right
J4

Adafruit Feather USB-C design files

The KiCad project lives in the makeristic/Adafruit_Feather_USB-C repository on GitHub; these links point at the commit this page was built from.

Adafruit Feather USB-C: common questions

How big is the Adafruit Feather USB-C PCB?

The Adafruit Feather USB-C measures 52.5 × 22.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Adafruit Feather USB-C?

4 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the Adafruit Feather USB-C design files?

From the makeristic/Adafruit_Feather_USB-C repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Adafruit Feather USB-C design in my own project?

It is published under Custom license, which limits how it may be reused; read the license before building on it.

Similar boards