HardLabs

MAPone - Bare Bones Arduino

MakersAsylumIndia·MAPone·kicad/MAPone.kicad_pcb

MAPone - Bare Bones Arduino PCB layout, top view — open source AVR/Arduino board by MakersAsylumIndia

About the MAPone - Bare Bones Arduino PCB

MAPone - Bare Bones Arduino is an open source AVR/Arduino PCB design by MakersAsylumIndia, published on GitHub. It is a 2-layer board measuring 70 × 30 mm, with 33 components from 24 distinct parts.

Its main chip is the ATMEGA328-P, from the AVR/Arduino family. Other key parts include the 7805. By type, the board carries 8 capacitors, 6 connectors, 3 diodes, 3 resistors, 2 ICs and 1 crystal.

From the project

A really bare bones Arduino using ATMega 328P DIP, SPI and Serial Interfaces and a few LEDs. Arduino stripped down to bare basics so everyone can afford it.

A really bare bones Arduino using ATMega 328P DIP, SPI and Serial Interfaces and a few LEDs. Arduino stripped down to bare basics so everyone can afford it.

[CERN Open Hardware Licence v1.2 ]:http://www.ohwr.org/attachments/2388/cernohlv12.txt

MAPone - Bare Bones Arduino, from the project README
From the project README

Main components on the MAPone - Bare Bones Arduino

7805ATMEGA328-P

MAPone - Bare Bones Arduino bill of materials (BOM)

33 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
7805
U1
1
ATMEGA328-P
U2
1
16MHz
X1
1
BARREL_JACK
J1
1
USB-Micro
J2
4
CONN_1
P1, P2, P3, P4
1
V_SEL
H1
1
Power
H2
1
LiPo_7V2
H3
1
ANALOG
H4
1
AREF
H5
1
IO_L
H6
1
IO_H
H7
1
FTDI
H8
1
ISP
H9
1
RST
SW1
1
1N4007
D1
1
PWR
D2
1
Blink
D3
5
100n
C1, C3, C4, C5, C6
Show 4 more
QtyPartRefs
1
100u
C2
2
22pF
C7, C8
1
10k
R1
2
300E
R2, R3

MAPone - Bare Bones Arduino design files

The KiCad project lives in the MakersAsylumIndia/MAPone repository on GitHub; these links point at the commit this page was built from.

MAPone - Bare Bones Arduino: common questions

What microcontroller does the MAPone - Bare Bones Arduino use?

The MAPone - Bare Bones Arduino is built around the ATMEGA328-P, from the AVR/Arduino family.

How big is the MAPone - Bare Bones Arduino PCB?

The MAPone - Bare Bones Arduino measures 70 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the MAPone - Bare Bones Arduino?

33 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the MAPone - Bare Bones Arduino design files?

From the MakersAsylumIndia/MAPone repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the MAPone - Bare Bones Arduino design in my own project?

The repository has no license, so all rights stay with MakersAsylumIndia. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the MAPone - Bare Bones Arduino without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in MAPone

Similar boards