HardLabs

Flex-Battery-Interrupter

makersmakingchange·Flex-Battery-Interrupter·Design_Files/PCB_Files/Flex_Battery_Interrupter_200/Flex_Battery_Interrupter_200.kicad_pcb

Flex-Battery-Interrupter PCB layout, top view — open source board by makersmakingchange

About the Flex-Battery-Interrupter PCB

Flex-Battery-Interrupter is an open source PCB design by makersmakingchange, published on GitHub. It is a 2-layer board measuring 203.2 × 34.3 mm, with 2 components from 2 distinct parts.

It belongs with the power & battery designs in this gallery.

From the project

Open-source battery interrupter based on a flexible PCB and a 3.5 mm switch jack for switch adapting simple battery-powered toys or electronic devices.

A battery interrupter is a simple, affordable device that enables you to switch adapt many battery powered electronics devices and toys. The battery interrupt is slipped in between the batteries or battery and battery terminal, breaking the circuit until a switch is attached and closed.

This device is a battery interrupter based on a flexible PCB with a mono/stereo 3.5 mm audio jack.

Flex-Battery-Interrupter bill of materials (BOM)

2 components, 2 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
JACK_STEREO
J1
1
batteryInterrupter
J2

Flex-Battery-Interrupter design files

The KiCad project lives in the makersmakingchange/Flex-Battery-Interrupter repository on GitHub; these links point at the commit this page was built from.

Flex-Battery-Interrupter: common questions

How big is the Flex-Battery-Interrupter PCB?

The Flex-Battery-Interrupter measures 203.2 × 34.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Flex-Battery-Interrupter?

2 components, from 2 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Flex-Battery-Interrupter design files?

From the makersmakingchange/Flex-Battery-Interrupter repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Flex-Battery-Interrupter design in my own project?

The repository has no license, so all rights stay with makersmakingchange. Use it as a reference, and ask the author before reusing the design.

Similar boards