Agribot

Maleksameh61·Agribot·PCB/agribot.kicad_pcb

Agribot PCB layout, top view — open source ESP32 board by Maleksameh61

About the Agribot PCB

Agribot is an open source ESP32 PCB design by Maleksameh61, published on GitHub under the MIT license. It is a 2-layer board measuring 260 × 149.6 mm, with 96 components from 42 distinct parts.

Its main chip is the ESP32 DevKit 30-pin, from the ESP32 family. Other key parts include the Display link (CYD), ultrasonic, BH1750_GY302_Module, MPU6050_GY521 and MAX98357A_Module. By type, the board carries 29 capacitors, 22 resistors, 16 connectors, 12 ICs, 8 modules and 6 diodes.

It belongs with the robotics & motion, audio and sensors designs in this gallery.

From the project

AgriBot is a farming rover with a top speed of 1.4 km/h, and this is the one board that runs all of it: three ESP32s, five buck converters, the motor driver links, a stepper that shoves a soil probe into the ground, GPS, a SIM800L and two speakers, all on 260 x 150 mm of 2 oz cop

AgriBot is a farming rover with a top speed of 1.4 km/h, and this is the one board that runs all of it: three ESP32s, five buck converters, the motor driver links, a stepper that shoves a soil probe into the ground, GPS, a SIM800L and two speakers, all on 260 x 150 mm of 2 oz copper.

Your phone joins the WiFi network that the Sensors ESP32 puts up, then sends throttle and steering about 20 times a second over UDP. Sensors passes that down a UART to the Motion ESP32, and Motion mixes it into left and right wheel speeds for the two Cytron MDD10A motor drivers. The drivers live off the board.…

Agribot, from the project README
From the project README

Main components on the Agribot

Display link (CYD)ultrasonicBH1750_GY302_ModuleMPU6050_GY521MAX98357A_ModuleSIM800L_ModuleDRV8825_CarrierESP32 DevKit 30-pin

Agribot bill of materials (BOM)

96 components, 42 distinct parts.

QtyPartRefs
1
Display link (CYD)
U1
2
ultrasonic
U2, U3
1
BH1750_GY302_Module
U4
1
MPU6050_GY521
U5
2
MAX98357A_Module
U6, U7
1
SIM800L_Module
U8
1
DRV8825_Carrier
U9
3
ESP32 DevKit 30-pin
U10, U11, U12
2
Motor_Servo
M1, M2
5
LM2596S_Module
M3, M4, M5, M6, M7
1
MAX485_Auto_Module
M8
1
M1_PWR
J1
1
M2_PWR
J2
1
SOIL_PROBE_PWR
J3
1
Screw_Terminal_01x02
J4
2
XT60
J5, J6
2
Conn_01x03_Pin
J7, J8
1
AHT20_BMP280_Conn_1x04
J9
1
NEMA17_Conn_1x04
J10
1
NEO6M_GPS
J11
Show 22 more
QtyPartRefs
2
MDD10A_Signal
J12, J13
1
MicroSD_Conn_1x06
J14
1
spare audio pins
J15
1
spare sensor pins
J16
1
T5A
F1
2
20A
F2, F3
5
LED
D1, D2, D3, D4, D5
1
MBR4045CT
D6
18
100nF 50V
C1, C2, C3, C4, C5, C6, C7, C8 +10
1
10uF 16V
C19
3
100uF 16V
C20, C21, C22
2
470uF 16V
C23, C24
4
1000uF 16V
C25, C26, C27, C28
1
1000uF 35V
C29
5
220
R1, R2, R3, R4, R5
3
1k
R6, R7, R8
2
2k
R9, R10
1
3.3k
R11
2
4.7k
R12, R13
5
10k
R14, R15, R16, R17, R18
2
22k
R19, R20
2
100k
R21, R22

Agribot design files

The KiCad project lives in the Maleksameh61/Agribot repository on GitHub; these links point at the commit this page was built from.

Agribot: common questions

What microcontroller does the Agribot use?

The Agribot is built around the ESP32 DevKit 30-pin, from the ESP32 family.

How big is the Agribot PCB?

The Agribot measures 260 × 149.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Agribot?

96 components, from 42 distinct parts. The full bill of materials is listed on this page.

Where can I download the Agribot design files?

From the Maleksameh61/Agribot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Agribot design in my own project?

Yes, under the terms of its MIT license, which Maleksameh61 chose for the repository.

Can I test firmware for the Agribot without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards