HardLabs

Main (Teensy)

marc-cr1810·SoccBot·PCB/KiCAD/Main (Teensy)/Main (Teensy).kicad_pcb

Main (Teensy) PCB layout, top view — open source NXP board by marc-cr1810

About the Main (Teensy) PCB

Main (Teensy) is an open source NXP PCB design by marc-cr1810, published on GitHub. It is a 2-layer board measuring 149.9 × 137.1 mm, with 158 components from 30 distinct parts.

Its main chip is the Teensy4.0, from the NXP family. Other key parts include the ATmega328PB-A and ADG608BRUZ. By type, the board carries 58 resistors, 32 capacitors, 20 diodes, 10 connectors, 6 ICs and 4 switches.

Main components on the Main (Teensy)

ATmega328PB-ATeensy4.0ADG608BRUZ

Main (Teensy) bill of materials (BOM)

158 components, 30 distinct parts.

QtyPartRefs
1
ATmega328PB-A
U1
1
~
U2
1
Teensy4.0
U3
3
ADG608BRUZ
ADG608BRZ
U4, U5, U6
2
BSS138
Q1, Q2
1
Crystal
Y1
1
Conn_02x03_Odd_Even
J1
1
Conn_01x02
J2
3
Conn_01x04
J3, J4, J7
1
Conn_01x02
J5
1
Conn_01x06
J6
2
Conn_01x02
J8, J9
1
Conn_01x04
J10
1
Fuse
F1
24
TSOP41xx
IR1, IR2, IR3, IR4, IR5, IR6, IR7, IR8 +16
1
1101M2S3CGE2
S1
1
2454982-4
S2
2
TS04-66-70-BK-260-SMT
S3, S4
2
GREEN_LED
D1, D20
2
RED_LED
D2, D19
Show 10 more
QtyPartRefs
16
BALL_DIR_LED
D3, D4, D5, D6, D7, D8, D9, D10 +8
6
100nF
C1, C2, C3, C9, C17, C26
2
22pF
C4, C5
24
4.7uF
C8, C10, C11, C12, C13, C14, C15, C16 +16
4
330
R1, R2, R58, R59
5
10k
R4, R5, R6, R7, R61
24
100
R8, R9, R10, R11, R12, R13, R14, R15 +16
8
4.7k
R34, R35, R36, R37, R38, R39, R40, R41
16
130
R42, R43, R44, R45, R46, R47, R48, R49 +8
1
82
R60

Main (Teensy) design files

The KiCad project lives in the marc-cr1810/SoccBot repository on GitHub; these links point at the commit this page was built from.

Main (Teensy): common questions

What microcontroller does the Main (Teensy) use?

The Main (Teensy) is built around the Teensy4.0, from the NXP family.

How big is the Main (Teensy) PCB?

The Main (Teensy) measures 149.9 × 137.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main (Teensy)?

158 components, from 30 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main (Teensy) design files?

From the marc-cr1810/SoccBot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Main (Teensy) design in my own project?

The repository has no license, so all rights stay with marc-cr1810. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main (Teensy) without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug NXP firmware against it before you order a PCB.

More boards in SoccBot

Similar boards