HardLabs

Afc xiao

mariodivece·esphometemplates·afc/schamatics-v4/afc-xiao.kicad_pcb

Afc xiao PCB layout, top view — open source ESP32 board by mariodivece

About the Afc xiao PCB

Afc xiao is an open source ESP32 PCB design by mariodivece, published on GitHub under the MIT license. It is a 2-layer board measuring 124.5 × 57.2 mm, with 10 components from 3 distinct parts.

Its main chip is the XIAO-ESP32-S3-DIP, from the ESP32 family.

It belongs with the iot & wireless designs in this gallery.

From the project

Templates for ESPhome

device classes: - Analog Device Classes - Binary Device Classes - NodeMCU 32s Pinout

Afc xiao bill of materials (BOM)

10 components, 3 distinct parts.

QtyPartRefs
4
CP_Radial_D5.0mm_P2.50mm
C_1, C_2, C_3, C_4
5
PWM 4-pin Fan Header
ENV1, FAN1, FAN2, FAN3, FAN4
1
XIAO-ESP32-S3-DIP
XIAO-ESP32-S3

Afc xiao design files

The KiCad project lives in the mariodivece/esphometemplates repository on GitHub; these links point at the commit this page was built from.

Afc xiao: common questions

What microcontroller does the Afc xiao use?

The Afc xiao is built around the XIAO-ESP32-S3-DIP, from the ESP32 family.

How big is the Afc xiao PCB?

The Afc xiao measures 124.5 × 57.2 mm, has 2 copper layers and is 1.58 mm thick.

How many components are on the Afc xiao?

10 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the Afc xiao design files?

From the mariodivece/esphometemplates repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Afc xiao design in my own project?

Yes, under the terms of its MIT license, which mariodivece chose for the repository.

Can I test firmware for the Afc xiao without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in esphometemplates

Similar boards