0030 PLCC44 Breakout
MarkD833·various_package_breakout_boards·boards/0030_PLCC44_Breakout.kicad_pcb
About the 0030 PLCC44 Breakout
0030 PLCC44 Breakout is an open source PCB design by MarkD833, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 48.3 × 48.3 mm, with 9 components from 4 distinct parts.
Other key parts include the Generic_44_Pins. By type, the board carries 8 connectors and 1 IC.
It belongs with the dev boards & breakouts and retro computing designs in this gallery.
From the project
Various PLCC breakout boards
For each breakout board, each pin on the PLCC socket is broken out into 2 pinheader (or pinsocket) contacts. There are 8 ground pins that connect to the copper pour BUT do not connect to any pins on the PLCC socket. There is no decoupling provided on the breakout board as the power and ground pins are specific to the actual device being used.
Please see the boards folder for the Kicad design files.

Main components on the 0030 PLCC44 Breakout
0030 PLCC44 Breakout bill of materials (BOM)
9 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Generic_44_Pins | PLCC-44_THT-Socket | U1 |
| 2 | Conn_02x12_Odd_Even | PinSocket_2x12_P2.54mm_Vertical | J1, J3 |
| 2 | Conn_02x10_Odd_Even | PinSocket_2x10_P2.54mm_Vertical | J2, J4 |
| 4 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J5, J6, J7, J8 |
0030 PLCC44 Breakout design files
The KiCad project lives in the MarkD833/various_package_breakout_boards repository on GitHub; these links point at the commit this page was built from.
0030 PLCC44 Breakout: common questions
How big is the 0030 PLCC44 Breakout?
The 0030 PLCC44 Breakout measures 48.3 × 48.3 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 0030 PLCC44 Breakout?
9 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the 0030 PLCC44 Breakout design files?
From the MarkD833/various_package_breakout_boards repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 0030 PLCC44 Breakout design in my own project?
Yes, under the terms of its GPL-3.0 license, which MarkD833 chose for the repository.
More boards in various_package_breakout_boards
Similar boards
134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kExpansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1k