HardLabs

Tinypico goodisplay

martinberlin·H-spi-adapters·tinypico-goodisplay/tinypico-goodisplay.kicad_pcb

Tinypico goodisplay PCB layout, top view — open source board by martinberlin

About the Tinypico goodisplay PCB

Tinypico goodisplay is an open source PCB design by martinberlin, published on GitHub under the CERN-OHL-W-2.0 license. It is a 2-layer board measuring 53.8 × 17.8 mm, with 33 components from 19 distinct parts.

Other key parts include the PCF8563T. By type, the board carries 14 capacitors, 7 resistors, 5 diodes, 1 IC, 1 transistor and 1 crystal.

It belongs with the displays & leds designs in this gallery.

From the project

PCB design for SPI adapters (HATs)

In this repository we will keep PCB designs done in KiCAD for SPI adapters we use. This PCB hardware work uses the CERN Open Hardware Licence Version 2 in the weakly reciprocal version. Be aware that this is experimental work mostly done for research and mass-producing this PCB's is not permitted without our written consent. Fabricating and selling hardware also implies that you need to provide support / fixes and maintain your code examples up to date.

Tinypico goodisplay, from the project README
From the project README

Main components on the Tinypico goodisplay

PCF8563T

Tinypico goodisplay bill of materials (BOM)

33 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PCF8563T
U2
1
SI1308
Si1308
Q1
1
Crystal_Small
Y1
1
AFC24-S24FIC-00
J1
1
CR1220
BT1
1
selector
JP1
3
MBR0530
D1, D2, D3
2
1N4148WS
D4, D5
1
10UH
10uH
L1
6
4.7UF
4.7uF
C1, C2, C3, C7, C9, C10
4
1UF
1uF
C4, C5, C6, C8
1
4.7uF 50V
C11
1
4.7UF
4.7uF
C12
2
12 pF
C13, C14
2
10K
R1, R4
1
0.47R
R2
1
3R
R3
1
10 K
R5
2
4.7K
R6, R7

Tinypico goodisplay design files

The KiCad project lives in the martinberlin/H-spi-adapters repository on GitHub; these links point at the commit this page was built from.

Tinypico goodisplay: common questions

How big is the Tinypico goodisplay PCB?

The Tinypico goodisplay measures 53.8 × 17.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tinypico goodisplay?

33 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Tinypico goodisplay design files?

From the martinberlin/H-spi-adapters repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Tinypico goodisplay design in my own project?

Yes, under the terms of its CERN-OHL-W-2.0 license, which martinberlin chose for the repository.

More boards in H-spi-adapters

Similar boards