Main Board EME (Estación Meteorológica Estática)

MartinLautaroGimenez·estacion-meteorologica-estatica·pcb/MotherBoard/EME.kicad_pcb

Main Board EME (Estación Meteorológica Estática) layout, top view — open source ESP32 board by MartinLautaroGimenez

About the Main Board EME (Estación Meteorológica Estática)

Main Board EME (Estación Meteorológica Estática) is an open source ESP32 PCB design by MartinLautaroGimenez, published on GitHub. It is a 2-layer board measuring 100 × 63.1 mm, with 57 components from 39 distinct parts.

Its main chip is the ESP32-DevKit_V1, from the ESP32 family. By type, the board carries 22 connectors, 16 resistors, 11 capacitors, 3 diodes, 2 transistors and 1 IC.

Main Board EME (Estación Meteorológica Estática), from the project README
From the project README

Main Board EME (Estación Meteorológica Estática) bill of materials (BOM)

57 components, 39 distinct parts.

QtyPartRefs
1
~
U2
2
IRF540N
Q1, Q2
1
BMP180
J1
1
volti
J2
1
DHT22
J3
1
Hoja Mojada
J4
1
PanelSolar
J5
1
BH1750
J6
1
MQ135
J7
1
Baterias
J8
2
Jumper
J9, J20
1
Reset
J10
1
UART2
J11
1
SPI_CONN
J12
1
UART0
J13
1
GPIO's
J14
2
Alimentaciones
J15, J16
1
Anemómetro
J17
1
G->G1
J18
1
I2C
J19
Show 19 more
QtyPartRefs
1
veleta
J21
1
G->G2
J22
1
5v
Entrada_5v1
1
Enable
SW1
1
1N5400
D1
2
LED
D2, D3
5
104
C1, C3, C7, C10, C12
2
220uF
C2, C4
2
22uF
C5, C6
1
104
C8
1
104
C9
1
1M
R1
4
1k
R2, R3, R17, R20
3
10k
R5, R6, R16
1
5k1
R7
1
180k
R8
1
12k
R9
1
22k
R10
4
4k7
R18, R19, R22, R23

Main Board EME (Estación Meteorológica Estática) design files

The KiCad project lives in the MartinLautaroGimenez/estacion-meteorologica-estatica repository on GitHub; these links point at the commit this page was built from.

Main Board EME (Estación Meteorológica Estática): common questions

What microcontroller does the Main Board EME (Estación Meteorológica Estática) use?

The Main Board EME (Estación Meteorológica Estática) is built around the ESP32-DevKit_V1, from the ESP32 family.

How big is the Main Board EME (Estación Meteorológica Estática)?

The Main Board EME (Estación Meteorológica Estática) measures 100 × 63.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Main Board EME (Estación Meteorológica Estática)?

57 components, from 39 distinct parts. The full bill of materials is listed on this page.

Where can I download the Main Board EME (Estación Meteorológica Estática) design files?

From the MartinLautaroGimenez/estacion-meteorologica-estatica repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Main Board EME (Estación Meteorológica Estática) design in my own project?

The repository has no license, so all rights stay with MartinLautaroGimenez. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Main Board EME (Estación Meteorológica Estática) without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in estacion-meteorologica-estatica

Similar boards