OccupancySensorBoard

matthewgperry·cs4220-finalProject·occupancySensorBoard/occupancySensorBoard.kicad_pcb

OccupancySensorBoard PCB layout, top view — open source ESP32 board by matthewgperry

About the OccupancySensorBoard PCB

OccupancySensorBoard is an open source ESP32 PCB design by matthewgperry, published on GitHub. It is a 2-layer board measuring 54.8 × 78 mm, with 5 components from 5 distinct parts.

Its main chip is the Esp32 Header1, from the ESP32 family.

It belongs with the iot & wireless, sensors and audio designs in this gallery.

From the project

Occupancy Sensor implementation with Matter

This repository contains the hardware schematics (PCB design files) in occupancySensorBoard, the initial Arduino scripts in arduino, and the ESP32 firmware in firmware.

The firmware defines an occupancy sensor with the DFRobot C4001 MM-Wave sensor with the Matter standard.

Note: The ESP-IDF has an unresolved bug, requiring a manual workaround. The bug I experienced is described here.

OccupancySensorBoard bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
Esp32 Header1
J1
1
Esp32 Header2
J2
1
mmWave Header
J3
1
PIR Header
J4
1
Breakout Header
J5

OccupancySensorBoard design files

The KiCad project lives in the matthewgperry/cs4220-finalProject repository on GitHub; these links point at the commit this page was built from.

OccupancySensorBoard: common questions

What microcontroller does the OccupancySensorBoard use?

The OccupancySensorBoard is built around the Esp32 Header1, from the ESP32 family.

How big is the OccupancySensorBoard PCB?

The OccupancySensorBoard measures 54.8 × 78 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the OccupancySensorBoard?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the OccupancySensorBoard design files?

From the matthewgperry/cs4220-finalProject repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the OccupancySensorBoard design in my own project?

The repository has no license, so all rights stay with matthewgperry. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the OccupancySensorBoard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in cs4220-finalProject

Similar boards