STM32-DevBoard
maxai472·STM32-DevBoard
About the STM32-DevBoard PCB
STM32-DevBoard is an open source STM32 PCB design by maxai472, published on GitHub. It is a 2-layer board measuring 55.5 × 45.5 mm, with 51 components from 32 distinct parts.
Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the TPS563209DDCR and USBLC6-2SC6. By type, the board carries 19 capacitors, 13 resistors, 6 connectors, 3 ICs, 3 inductors and 2 LEDs.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
��# STM32-DevBoard This is my attempt to create a development board based on the STM32F103C8T6 microcontroller, with both USB-C and up to 12
��# STM32-DevBoard This is my attempt to create a development board based on the STM32F103C8T6 microcontroller, with both USB-C and up to 12V input through a barrel Jack. The idea is to create this board as a learning exercise and I will expand the design into a sensor fusion board in the future. …
Main components on the STM32-DevBoard
STM32-DevBoard bill of materials (BOM)
51 components, 32 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F103C8T6 | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TPS563209DDCR Texas Instruments | DDC0006A | U2 |
| 1 | USBLC6-2SC6 STMicroelectronics | SOT-23-6 | U3 |
| 1 | AO3401A AOS | SOT-23 | Q1 |
| 1 | 16MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.00mm_Vertical | J1 |
| 1 | I2C Bus 1 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Serial Debugger | PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | USART1 | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | 12402012E212A | AMPHENOL_12402012E212A | J5 |
| 1 | PJ-002A | CUI_PJ-002A | J6 |
| 1 | 250mA | Fuse_1206_3216Metric | F1 |
| 1 | SW_SPDT | SW_SPDT_PCM12 | SW1 |
| 1 | LED1 | LED_0603_1608Metric | LED1 |
| 1 | LED2 | LED_0603_1608Metric | LED2 |
| 1 | B5819W | D_SOD-123 | D1 |
| 1 | 600 @ 600MHz | L_0805_2012Metric | FB1 |
| 1 | 120R | L_0603_1608Metric | FB2 |
| 1 | 2.2u | IND_VLS6045EX-2R2N | L1 |
| 3 | 10u | C_0805_2012Metric | C1, C9, C11 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 7 | 100n | C_0402_1005Metric | C2, C4, C6, C7, C8, C10, C14 |
| 2 | 10p | C_0402_1005Metric | C3, C5 |
| 2 | 1u | C_0402_1005Metric | C12, C13 |
| 3 | 22uF | C_0603_1608Metric | C15, C16, C17 |
| 2 | 470n | C_0402_1005Metric | C18, C19 |
| 2 | 4.7K | R_0402_1005Metric | R1, R3 |
| 2 | 10k | R_0402_1005Metric | R2, R9 |
| 2 | 22R | R_0402_1005Metric | R4, R5 |
| 3 | 1K | R_0402_1005Metric | R6, R7, R11 |
| 1 | 33k2 | R_0402_1005Metric | R8 |
| 2 | 5k1 | R_0402_1005Metric | R10, R12 |
| 1 | R | R_0402_1005Metric | R13 |
STM32-DevBoard design files
The KiCad project lives in the maxai472/STM32-DevBoard repository on GitHub; these links point at the commit this page was built from.
- LayoutSTM32-DevBoard.kicad_pcb
- SchematicSTM32-DevBoard.kicad_sch
STM32-DevBoard: common questions
What microcontroller does the STM32-DevBoard use?
The STM32-DevBoard is built around the STM32F103C8T6, from the STM32 family.
How big is the STM32-DevBoard PCB?
The STM32-DevBoard measures 55.5 × 45.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32-DevBoard?
51 components, from 32 distinct parts. The full bill of materials is listed on this page.
Where can I download the STM32-DevBoard design files?
From the maxai472/STM32-DevBoard repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the STM32-DevBoard design in my own project?
The repository has no license, so all rights stay with maxai472. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32-DevBoard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k