Hw sense
MaxBaex·hw_sense·pcb/soar_sense.kicad_pcb
About the Hw sense PCB
Hw sense is an open source STM32 PCB design by MaxBaex, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 47.8 × 23.1 mm, with 58 components from 22 distinct parts.
Its main chip is the STM32F103CBTx, from the STM32 family. Other key parts include the SPX3819M5-L-3-3, SHT35-DIS and MAX3051. By type, the board carries 19 capacitors, 14 resistors, 11 diodes, 7 connectors, 4 ICs and 1 crystal.
It belongs with the sensors designs in this gallery.
From the project
PCB design for tiny temperature and humidty sensor
Main components on the Hw sense
Hw sense bill of materials (BOM)
58 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SPX3819M5-L-3-3 | SOT-23-5 | U1 |
| 1 | STM32F103CBTx | LQFP-48_7x7mm_P0.5mm | U2 |
| 1 | SHT35-DIS | Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm | U3 |
| 1 | MAX3051 | SOT-23-8_Handsoldering | U4 |
| 1 | 8MHz | Crystal_SMD_5032-4Pin_5.0x3.2mm | Y1 |
| 3 | Conn_02x03_Top_Bottom | pcb_edge_2_3 | J1, J6, J7 |
| 3 | Conn_02x02_Top_Bottom | pcb_edge_2_2 | J3, J4, J5 |
| 1 | Conn_01x06 | Molex_PicoBlade_53048-0610_1x06_P1.25mm_Horizontal | J8 |
| 1 | SolderJumper_2_Open | SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm | JP1 |
| 2 | LED_Small | D_0603_1608Metric | D1, D2 |
| 1 | D_Small | D_SOD-323 | D3 |
| 8 | D_TVS | D_SOD-323 | D5, D6, D7, D8, D9, D10, D11, D12 |
| 1 | FerriteBead_Small | L_0805_2012Metric | FB1 |
| 2 | 10u | C_0603_1608Metric | C1, C7 |
| 14 | 100n | C_0603_1608Metric | C2, C6, C8, C9, C10, C11, C12, C13 +6 |
| 2 | 30p | C_0402_1005Metric | C3, C5 |
| 1 | 10n | C_0603_1608Metric | C4 |
| 7 | 10k | R_0603_1608Metric | R1, R9, R10, R12, R13, R14, R15 |
| 1 | 120R | R_0603_1608Metric | R2 |
| 1 | 27k | R_0603_1608Metric | R3 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 4k7 | R_0603_1608Metric | R4, R5, R6 |
| 2 | R200 | R_0603_1608Metric | R7, R8 |
Hw sense design files
The KiCad project lives in the MaxBaex/hw_sense repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/soar_sense.kicad_pcb
- Schematicpcb/soar_sense.kicad_sch
Hw sense: common questions
What microcontroller does the Hw sense use?
The Hw sense is built around the STM32F103CBTx, from the STM32 family.
How big is the Hw sense PCB?
The Hw sense measures 47.8 × 23.1 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the Hw sense?
58 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Hw sense design files?
From the MaxBaex/hw_sense repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Hw sense design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which MaxBaex chose for the repository.
Can I test firmware for the Hw sense without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k