STM32F407 Mega converter
mazduino·stm32f407xxx-mega-layout·KiCAD/STM32F407_Mega_converter/STM32F407_Mega_converter.kicad_pcb
About the STM32F407 Mega converter PCB
STM32F407 Mega converter is an open source STM32 PCB design by mazduino, published on GitHub. It is a 2-layer board measuring 102 × 53.8 mm, with 94 components from 30 distinct parts.
Its main chip is the STM32F407VGTX, from the STM32 family. Other key parts include the MCP6004, AMS1117-3.3 and MCP2551-I-SN. By type, the board carries 44 resistors, 24 capacitors, 10 connectors, 7 ICs, 2 crystals and 2 switches.
From the project
STMM32F407xxx Mega Layout. Made For Speeduino and RusEFI Firmware

Main components on the STM32F407 Mega converter
STM32F407 Mega converter bill of materials (BOM)
94 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F407VGTX STM32F407VGTx | LQFP-100_14x14mm_P0.5mm | U1 |
| 4 | MCP6004 | SOIC127P600X175-14N | U2, U4, U5, U6 |
| 1 | AMS1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | MCP2551-I-SN | SOIC-8_3.9x4.9mm_P1.27mm | U7 |
| 1 | 8MHZ 8Mhz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | 32.768KHZ 32.768KHz | Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 5 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J1, J2, J3, J4, J5 |
| 1 | CONN_01X10_PIN Conn_01x10_Pin | PinHeader_1x10_P2.54mm_Vertical | J6 |
| 1 | CONN_02X18 Conn_02x18 | PinHeader_2x18_P2.54mm_Vertical | J7 |
| 1 | MSD-1-A | CUI_MSD-1-A | J8 |
| 1 | AU-Y1007 | ASSMANN_USB_TYPE-B | J9 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P2.54mm_Vertical | J10 |
| 1 | Polyfuse_Small | Fuse_1206_3216Metric | F1 |
| 2 | SW_Push | SW_SPST_CK_RS282G05A3 | SW1, SW2 |
| 2 | SML-310LTT86 RED | LED_0805_2012Metric | LED1, LED2 |
| 1 | SP0503BAHT | SOT-143 | D2 |
| 1 | SS13 | D_SMA | D3 |
| 3 | 1UF 1uf | C_0603_1608Metric | C1, C4, C16 |
| 13 | 100NF 100nF | C_0603_1608Metric | C2, C6, C11, C12, C13, C14, C15, C17 +5 |
| 2 | 2.2UF 2.2uf | C_0603_1608Metric | C3, C5 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 12PF 12pF | C_0603_1608Metric | C7, C8 |
| 2 | 20PF 20pF | C_0603_1608Metric | C9, C10 |
| 2 | 47UF 47uf | CP_Elec_5x5.4 | C25, C26 |
| 17 | 910 | R_0603_1608Metric | R1, R7, R8, R9, R10, R15, R16, R17 +9 |
| 17 | 470 | R_0603_1608Metric | R2, R3, R4, R5, R6, R11, R12, R13 +9 |
| 2 | RK73H2ATTD4700F 470r | R_0805_2012Metric | R35, R42 |
| 1 | 1M | R_0603_1608Metric | R36 |
| 1 | 4.7K | R_0603_1608Metric | R37 |
| 2 | 22 | R_0603_1608Metric | R38, R39 |
| 4 | 10K | R_0603_1608Metric | R40, R41, R43, R44 |
STM32F407 Mega converter design files
The KiCad project lives in the mazduino/stm32f407xxx-mega-layout repository on GitHub; these links point at the commit this page was built from.
STM32F407 Mega converter: common questions
What microcontroller does the STM32F407 Mega converter use?
The STM32F407 Mega converter is built around the STM32F407VGTX, from the STM32 family.
How big is the STM32F407 Mega converter PCB?
The STM32F407 Mega converter measures 102 × 53.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the STM32F407 Mega converter?
94 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the STM32F407 Mega converter design files?
From the mazduino/stm32f407xxx-mega-layout repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the STM32F407 Mega converter design in my own project?
The repository has no license, so all rights stay with mazduino. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the STM32F407 Mega converter without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in stm32f407xxx-mega-layout
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k