STM32F407 Mega layout rev1.1

mazduino·stm32f407xxx-mega-layout·KiCAD/STM32F407_Mega_converter/STM32F407_Mega_layout_rev1.1.kicad_pcb

STM32F407 Mega layout rev1.1 PCB layout, top view — open source STM32 board by mazduino

About the STM32F407 Mega layout rev1.1 PCB

STM32F407 Mega layout rev1.1 is an open source STM32 PCB design by mazduino, published on GitHub. It is a 2-layer board measuring 102 × 53.8 mm, with 94 components from 30 distinct parts.

Its main chip is the STM32F407VGTX, from the STM32 family. Other key parts include the MCP6004, AMS1117-3.3 and MCP2551-I-SN. By type, the board carries 44 resistors, 24 capacitors, 10 connectors, 7 ICs, 2 crystals and 2 switches.

From the project

STMM32F407xxx Mega Layout. Made For Speeduino and RusEFI Firmware

STM32F407 Mega layout rev1.1, from the project README
From the project README

Main components on the STM32F407 Mega layout rev1.1

STM32F407 Mega layout rev1.1 bill of materials (BOM)

94 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32F407VGTX
STM32F407VGTx
U1
4
MCP6004
U2, U4, U5, U6
1
AMS1117-3.3
U3
1
MCP2551-I-SN
U7
1
8MHZ
8Mhz
Y1
1
32.768KHZ
32.768KHz
Y2
5
CONN_01X08_PIN
Conn_01x08_Pin
J1, J2, J3, J4, J5
1
CONN_01X10_PIN
Conn_01x10_Pin
J6
1
CONN_02X18
Conn_02x18
J7
1
MSD-1-A
J8
1
AU-Y1007
J9
1
CONN_01X04_PIN
Conn_01x04_Pin
J10
1
Polyfuse_Small
F1
2
SW_Push
SW1, SW2
2
SML-310LTT86
RED
LED1, LED2
1
SP0503BAHT
D2
1
SS13
D3
3
1UF
1uf
C1, C4, C16
13
100NF
100nF
C2, C6, C11, C12, C13, C14, C15, C17 +5
2
2.2UF
2.2uf
C3, C5
Show 10 more
QtyPartRefs
2
12PF
12pF
C7, C8
2
20PF
20pF
C9, C10
2
47UF
47uf
C25, C26
17
910
R1, R7, R8, R9, R10, R15, R16, R17 +9
17
470
R2, R3, R4, R5, R6, R11, R12, R13 +9
2
RK73H2ATTD4700F
470r
R35, R42
1
1M
R36
1
4.7K
R37
2
22
R38, R39
4
10K
R40, R41, R43, R44

STM32F407 Mega layout rev1.1 design files

The KiCad project lives in the mazduino/stm32f407xxx-mega-layout repository on GitHub; these links point at the commit this page was built from.

STM32F407 Mega layout rev1.1: common questions

What microcontroller does the STM32F407 Mega layout rev1.1 use?

The STM32F407 Mega layout rev1.1 is built around the STM32F407VGTX, from the STM32 family.

How big is the STM32F407 Mega layout rev1.1 PCB?

The STM32F407 Mega layout rev1.1 measures 102 × 53.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F407 Mega layout rev1.1?

94 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32F407 Mega layout rev1.1 design files?

From the mazduino/stm32f407xxx-mega-layout repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the STM32F407 Mega layout rev1.1 design in my own project?

The repository has no license, so all rights stay with mazduino. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32F407 Mega layout rev1.1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in stm32f407xxx-mega-layout

Similar boards