HardLabs

ITI GP Smart Meter

MazenOsamaFarouk·ITI_GP_Smart_Meter·Energy_meter_board/Energy_meter_board.kicad_pcb

ITI GP Smart Meter PCB layout, top view — open source Raspberry Pi board by MazenOsamaFarouk

About the ITI GP Smart Meter PCB

ITI GP Smart Meter is an open source Raspberry Pi PCB design by MazenOsamaFarouk, published on GitHub. It is a 2-layer board measuring 86.1 × 68.2 mm, with 5 components from 4 distinct parts.

Its main chip is the Raspberry_Pi_2_3, from the Raspberry Pi family. Other key parts include the YAAJ_BluePill and TFT_ST7735_symbol. By type, the board carries 2 ICs and 2 connectors.

It belongs with the iot & wireless designs in this gallery.

From the project

Final Project for ITI program. ITs an IOT energy meter using Raspberry Pi and ARM

Main components on the ITI GP Smart Meter

YAAJ_BluePillTFT_ST7735_symbol

ITI GP Smart Meter bill of materials (BOM)

5 components, 4 distinct parts.

QtyPartRefs
1
YAAJ_BluePill
U1
1
TFT_ST7735_symbol
U3
2
Screw_Terminal_01x02
J1, J2
1
Raspberry_Pi_2_3
RP1

ITI GP Smart Meter design files

The KiCad project lives in the MazenOsamaFarouk/ITI_GP_Smart_Meter repository on GitHub; these links point at the commit this page was built from.

ITI GP Smart Meter: common questions

What microcontroller does the ITI GP Smart Meter use?

The ITI GP Smart Meter is built around the Raspberry_Pi_2_3, from the Raspberry Pi family.

How big is the ITI GP Smart Meter PCB?

The ITI GP Smart Meter measures 86.1 × 68.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ITI GP Smart Meter?

5 components, from 4 distinct parts. The full bill of materials is listed on this page.

Where can I download the ITI GP Smart Meter design files?

From the MazenOsamaFarouk/ITI_GP_Smart_Meter repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the ITI GP Smart Meter design in my own project?

The repository has no license, so all rights stay with MazenOsamaFarouk. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the ITI GP Smart Meter without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards