Led ceiling light
mbouyer·led_ceiling_light·hardware/led_ceiling_light.kicad_pcb
About the Led ceiling light PCB
Led ceiling light is an open source PCB design by mbouyer, published on GitHub under the BSD-2-Clause license. It is a 2-layer board measuring 105 × 60 mm, with 28 components from 17 distinct parts.
Other key parts include the AL8861. By type, the board carries 13 diodes, 7 resistors, 3 capacitors, 1 IC, 1 transistor and 1 connector.
It belongs with the power & battery designs in this gallery.
From the project
Plafonier à LEDs
Main components on the Led ceiling light
Led ceiling light bill of materials (BOM)
28 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AL8861 | TSOT-23-5_HandSoldering | U1 |
| 1 | BSS123 | SOT-23 | Q1 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal | J1 |
| 1 | 1M | Potentiometer_Piher_PT-10-V10_Vertical | RV1 |
| 6 | JE2835AWT | LED_PLCC_2835_Handsoldering | D1, D3, D5, D7, D9, D11 |
| 3 | N/A | LED_PLCC_2835_Handsoldering | D2, D6, D10 |
| 2 | SMBJ16A | D_SMB_Handsoldering | D4, D8 |
| 1 | SL04-GS08 | D_SMF | D12 |
| 1 | 2.7V | D_MiniMELF_Handsoldering | D13 |
| 1 | 68µH | L_Taiyo-Yuden_NR-80xx_HandSoldering | L1 |
| 1 | 100n | C_filter_0805 | C1 |
| 1 | 10µF25V | C_1210_3225Metric_Pad1.33x2.70mm_HandSolder | C2 |
| 1 | 1µF 25V | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 3 | 0 | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2, R3 |
| 2 | 976K | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R7 |
| 1 | 0.3Ω | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5 |
| 1 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6 |
Led ceiling light design files
The KiCad project lives in the mbouyer/led_ceiling_light repository on GitHub; these links point at the commit this page was built from.
Led ceiling light: common questions
How big is the Led ceiling light PCB?
The Led ceiling light measures 105 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Led ceiling light?
28 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the Led ceiling light design files?
From the mbouyer/led_ceiling_light repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Led ceiling light design in my own project?
Yes, under the terms of its BSD-2-Clause license, which mbouyer chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k