PCB 2MMouse

McK11on·Micromouse-Design·PCB_2MMouse/PCB_2MMouse.kicad_pcb

PCB 2MMouse layout, top view — open source STM32 board by McK11on

About the PCB 2MMouse

PCB 2MMouse is an open source STM32 PCB design by McK11on, published on GitHub. It is a 2-layer board measuring 70 × 90 mm, with 70 components from 29 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the TB6612FNG,C,8,EL, AMS1117-3.3 and AMS1117-5.0. By type, the board carries 23 capacitors, 21 resistors, 8 connectors, 7 diodes, 4 ICs and 4 transistors.

It belongs with the robotics & motion designs in this gallery.

From the project

Design and implementation of a micromouse robot for competitions, implementing filling algorithm and other technologies

PCB 2MMouse, from the project README
From the project README

Main components on the PCB 2MMouse

PCB 2MMouse bill of materials (BOM)

70 components, 29 distinct parts.

QtyPartRefs
1
TB6612FNG,C,8,EL
IC1
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
AMS1117-5.0
U3
4
IRLML6344TRPBF
Q5, Q6, Q7, Q8
1
8MHz
Y2
1
Conn_02x03_Odd_Even
J1
1
FreePins
J2
1
UART
J3
1
SWD
J4
1
Gyro
J5
1
Batery
J6
1
L_Motor
J7
1
R_Motor
J8
1
RESET
SW1
1
SW_SPDT
SW2
4
IR_LEFT
D1, D2, D3, D4
3
LED
D5, D6, D7
2
20pF
C3, C4
1
1uF
C5
Show 9 more
QtyPartRefs
5
10uF/10V
C6, C8, C10, C16, C18
15
100nF
C7, C9, C11, C12, C13, C14, C15, C17 +7
4
70
R1, R2, R3, R4
6
10k
R5, R6, R7, R8, R9, R18
1
1M
R10
6
4.7K
R11, R12, R13, R14, R15, R16
1
13K
R17
1
250
R19
2
200
R20, R21

PCB 2MMouse design files

The KiCad project lives in the McK11on/Micromouse-Design repository on GitHub; these links point at the commit this page was built from.

PCB 2MMouse: common questions

What microcontroller does the PCB 2MMouse use?

The PCB 2MMouse is built around the STM32F103C8T6, from the STM32 family.

How big is the PCB 2MMouse?

The PCB 2MMouse measures 70 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB 2MMouse?

70 components, from 29 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB 2MMouse design files?

From the McK11on/Micromouse-Design repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the PCB 2MMouse design in my own project?

The repository has no license, so all rights stay with McK11on. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB 2MMouse without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Micromouse-Design

Similar boards