PCB 2MMouse - RESPALDO

McK11on·Micromouse-Design·PCB_2MMouse/PCB_2MMouse - RESPALDO.kicad_pcb

PCB 2MMouse - RESPALDO layout, top view — open source STM32 board by McK11on

About the PCB 2MMouse - RESPALDO

PCB 2MMouse - RESPALDO is an open source STM32 PCB design by McK11on, published on GitHub. It is a 2-layer board measuring 70 × 90 mm, with 77 components from 31 distinct parts.

Its main chip is the STM32F103C8T6, from the STM32 family. Other key parts include the TB6612FNG,C,8,EL, AMS1117-3.3 and AMS1117-5.0. By type, the board carries 25 capacitors, 21 resistors, 8 transistors, 8 connectors, 7 diodes and 4 ICs.

It belongs with the robotics & motion designs in this gallery.

From the project

Design and implementation of a micromouse robot for competitions, implementing filling algorithm and other technologies

PCB 2MMouse - RESPALDO, from the project README
From the project README

Main components on the PCB 2MMouse - RESPALDO

PCB 2MMouse - RESPALDO bill of materials (BOM)

77 components, 31 distinct parts.

QtyPartRefs
1
TB6612FNG,C,8,EL
IC1
1
STM32F103C8T6
U1
1
AMS1117-3.3
U2
1
AMS1117-5.0
U3
4
Q_Photo_NPN_CE
Q1, Q2, Q3, Q4
4
IRLML6344TRPBF
Q5, Q6, Q7, Q8
1
830003000
Y1
1
8MHz
Y2
1
Conn_02x03_Odd_Even
J1
1
FreePins
J2
1
UART
J3
1
SWD
J4
1
Gyro
J5
1
Batery
J6
1
L_Motor
J7
1
R_Motor
J8
1
RESET
SW1
1
SW_SPDT
SW2
4
IR_LEFT
D1, D2, D3, D4
3
LED
D5, D6, D7
Show 11 more
QtyPartRefs
4
20pF
C1, C2, C3, C4
1
1uF
C5
5
10uF/10V
C6, C8, C10, C16, C18
15
100nF
C7, C9, C11, C12, C13, C14, C15, C17 +7
4
70
R1, R2, R3, R4
6
10k
R5, R6, R7, R8, R9, R18
1
1M
R10
6
4.7K
R11, R12, R13, R14, R15, R16
1
13K
R17
1
250
R19
2
200
R20, R21

PCB 2MMouse - RESPALDO design files

The KiCad project lives in the McK11on/Micromouse-Design repository on GitHub; these links point at the commit this page was built from.

PCB 2MMouse - RESPALDO: common questions

What microcontroller does the PCB 2MMouse - RESPALDO use?

The PCB 2MMouse - RESPALDO is built around the STM32F103C8T6, from the STM32 family.

How big is the PCB 2MMouse - RESPALDO?

The PCB 2MMouse - RESPALDO measures 70 × 90 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB 2MMouse - RESPALDO?

77 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the PCB 2MMouse - RESPALDO design files?

From the McK11on/Micromouse-Design repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the PCB 2MMouse - RESPALDO design in my own project?

The repository has no license, so all rights stay with McK11on. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PCB 2MMouse - RESPALDO without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in Micromouse-Design

Similar boards