10 open source boards using the TB6612FNG,C,8,EL
Real designs built with the TB6612FNG,C,8,EL, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Povbot2
wattnotions
65 × 30 mm25 parts2LNo license28ESP32
Wooden Clock - main board
tibm110 × 110 mm183 parts4LNo license1STM32
AML Micromouse 24 2
Oopsan204
65 × 85 mm72 parts2LNo license1ESP32
Micromouse
MukeshSethy
100 × 120 mm177 parts4LNo license0ESP32
Micro ROSbot
emericarhantdev
98.7 × 96.5 mm126 parts2LNo license0STM32
PCB 2MMouse - RESPALDO
McK11on
70 × 90 mm77 parts2LNo license0ESP32
PCB-Files
Pebblin
5 × 11.2 mm68 parts2LNo license0TB6612FNG
Will946
27.5 × 24.7 mm11 parts2LMIT1Nordic nRF
Micromouse pcb simplified
MukeshSethy
100 × 120 mm125 parts4LNo license0STM32
PCB 2MMouse
McK11on
70 × 90 mm70 parts2LNo license0
How designs wire the TB6612FNG,C,8,EL
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the TB6612FNG,C,8,EL connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
- The VM1 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
- The VM2 pin has a decoupling capacitor on 6 of 8 designs, most often 10 µF (then 100 nF).
- The VM3 pin has a decoupling capacitor on 6 of 8 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PGND1pin 3, 4 | Connected to: GND 100% | — |
| PGND2pin 9, 10 | Connected to: GND 100% | — |
| VM2pin 13 | Connected to: 5V 63% · a signal 38% |
|
| VM3pin 14 | Connected to: 5V 63% · a signal 38% |
|
| GNDpin 18 | Connected to: GND 100% | — |
| STBYpin 19 | Connected to: The microcontroller 38% · 3.3V 38% |
|
| VCCpin 20 | Connected to: 3.3V 63% · a signal 38% |
|
| VM1pin 24 | Connected to: 5V 63% · a signal 38% |
|
10 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Povbot2 by wattnotions, AML Micromouse 24 2 by Oopsan204, Wooden Clock - main board by tibm and TB6612FNG by Will946.
The TB6612FNG,C,8,EL in open source designs
The gallery holds 10 open source boards using the TB6612FNG,C,8,EL from 8 GitHub repositories; a typical one measures about 70 × 90 mm and carries around 75 components.
70% are two-layer designs, the rest use four layers or more, and 10% carry an open source license.
The most starred is Povbot2 by wattnotions.
Parts used alongside the TB6612FNG,C,8,EL
Microcontrollers on boards using the TB6612FNG,C,8,EL
What boards using the TB6612FNG,C,8,EL are built for
TB6612FNG,C,8,EL: common questions
Where can I find a TB6612FNG,C,8,EL reference design?
Each of the 10 boards on this page is a real design using the TB6612FNG,C,8,EL. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TB6612FNG,C,8,EL VCC pin?
The VCC pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the TB6612FNG,C,8,EL.
What decoupling capacitors do designs use on the TB6612FNG,C,8,EL VM1 pin?
The VM1 pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the TB6612FNG,C,8,EL.
What decoupling capacitors do designs use on the TB6612FNG,C,8,EL VM2 pin?
The VM2 pin has a decoupling capacitor on 6 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the TB6612FNG,C,8,EL.
Which microcontrollers do boards using the TB6612FNG,C,8,EL use?
Most are built on ESP32 (4), STM32 (3) and Nordic nRF (1).
How big is a typical board using the TB6612FNG,C,8,EL?
The median is 70 × 90 mm, and 70% are two-layer designs.
What is the most popular open source board using the TB6612FNG,C,8,EL?
By GitHub stars, Povbot2 by wattnotions, with 28 stars.
Can I simulate one of these boards using the TB6612FNG,C,8,EL before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.