Audio level shifter
mcqn·audio-level-shifter·audio-level-shifter/audio-level-shifter.kicad_pcb
About the Audio level shifter PCB
Audio level shifter is an open source PCB design by mcqn, published on GitHub under the CERN-OHL-S-2.0 license. It is a 2-layer board measuring 58 × 18 mm, with 5 components from 4 distinct parts.
By type, the board carries 2 connectors and 2 capacitors.
It belongs with the audio designs in this gallery.
From the project
A simple analogue attenuator circuit to connect line-level audio to mic-level audio
A simple analogue attenuator circuit to connect line-level audio to mic-level audio.
The Rode Wireless GO is a nice wireless microphone. We've also been using it, in combination with the audio-level-shifter board to act as a wireless relay for a remote speaker.
Aux out -> audio-level-shifter -> mic input on the Wireless GO transmitter -> Wireless GO receiver -> Aux in on speaker

Audio level shifter bill of materials (BOM)
5 components, 4 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | IN | CUI_SJ2-35813B-SMT-TR | J1 |
| 1 | OUT | CUI_SJ2-35813B-SMT-TR | J2 |
| 1 | R_Potentiometer_Dual | Potentiometer_Alps_RK09L_Double_Horizontal | RV1 |
| 2 | 0.1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
Audio level shifter design files
The KiCad project lives in the mcqn/audio-level-shifter repository on GitHub; these links point at the commit this page was built from.
Audio level shifter: common questions
How big is the Audio level shifter PCB?
The Audio level shifter measures 58 × 18 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Audio level shifter?
5 components, from 4 distinct parts. The full bill of materials is listed on this page.
Where can I download the Audio level shifter design files?
From the mcqn/audio-level-shifter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Audio level shifter design in my own project?
Yes, under the terms of its CERN-OHL-S-2.0 license, which mcqn chose for the repository.
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687