JTAG-RS232-Programmer
ME-IRL·JTAG-RS232-Programmer
About the JTAG-RS232-Programmer PCB
JTAG-RS232-Programmer is an open source PCB design by ME-IRL, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 33.8 × 30.7 mm, with 38 components from 19 distinct parts.
Other key parts include the 93LCxxC, NCP1117-3.3 and FT2232H. By type, the board carries 17 capacitors, 11 resistors, 3 ICs, 3 connectors, 3 diodes and 1 crystal.
It belongs with the usb & debug tools designs in this gallery.
Main components on the JTAG-RS232-Programmer
JTAG-RS232-Programmer bill of materials (BOM)
38 components, 19 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 93LCxxC | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | NCP1117-3.3 | SOT-223-3_TabPin2 | U3 |
| 1 | FT2232H | LQFP-64_10x10mm_P0.5mm | U4 |
| 1 | 12MHz | Crystal_SMD_HC49-SD | Y1 |
| 1 | USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Amphenol_12401610E4-2A | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 3 | LED | D_0805_2012Metric | D1, D2, D3 |
| 2 | 27pF | C_0402_1005Metric | C1, C2 |
| 1 | 3.3uF | C_0603_1608Metric | C3 |
| 10 | 100nF | C_0402_1005Metric | C4, C6, C10, C11, C12, C13, C14, C15 +2 |
| 2 | 4.7uF | C_0402_1005Metric | C5, C7 |
| 2 | 10uF | C_0805_2012Metric | C8, C9 |
| 3 | 10k | R_0402_1005Metric | R1, R2, R6 |
| 2 | 5.1k | R_0805_2012Metric | R3, R4 |
| 1 | 2.2k | R_0402_1005Metric | R5 |
| 1 | 12k | R_0402_1005Metric | R7 |
| 1 | 1k | R_0402_1005Metric | R8 |
| 3 | 120 | R_0603_1608Metric | R9, R10, R11 |
JTAG-RS232-Programmer design files
The KiCad project lives in the ME-IRL/JTAG-RS232-Programmer repository on GitHub; these links point at the commit this page was built from.
- LayoutProgrammer.kicad_pcb
JTAG-RS232-Programmer: common questions
How big is the JTAG-RS232-Programmer PCB?
The JTAG-RS232-Programmer measures 33.8 × 30.7 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the JTAG-RS232-Programmer?
38 components, from 19 distinct parts. The full bill of materials is listed on this page.
Where can I download the JTAG-RS232-Programmer design files?
From the ME-IRL/JTAG-RS232-Programmer repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the JTAG-RS232-Programmer design in my own project?
Yes, under the terms of its GPL-3.0 license, which ME-IRL chose for the repository.
Similar boards
USB Hub Test
osy
50 × 50 mm85 parts4LCC-BY-4.0703XG Station Power
osy
54.3 × 91 mm9 parts2LCC-BY-4.0703FW-EC-DongleHiderPlus
LeoDJ
28.2 × 26.1 mm14 parts4LCERN-OHL-W-2.0497Adapter tsop48
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter tsop48 solder
bbogush
48 × 33 mm3 parts2LGPL-3.0389Adapter soic8 solder
bbogush
48 × 20 mm3 parts2LGPL-3.0389