HardLabs

PicoChessClock

MeBadDev·PicoChessClock·schematics/chessclock.kicad_sch

This repository ships a schematic but no board layout.

About the PicoChessClock PCB

PicoChessClock is an open source RP2040/RP2350 PCB design by MeBadDev, published on GitHub. It is a board, with 8 components from 3 distinct parts.

Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. By type, the board carries 6 switches, 1 module and 1 connector.

From the project

A chess clock powered my Raspberry Pi Pico

Main components on the PicoChessClock

RaspberryPi_Pico

PicoChessClock bill of materials (BOM)

8 components, 3 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
RaspberryPi_Pico
A1
1
TFT7735
J1
6
SW_PUSH
SW1, SW2, SW3, SW4, SW5, SW6

PicoChessClock design files

The KiCad project lives in the MeBadDev/PicoChessClock repository on GitHub; these links point at the commit this page was built from.

PicoChessClock: common questions

What microcontroller does the PicoChessClock use?

The PicoChessClock is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.

How many components are on the PicoChessClock?

8 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PicoChessClock design files?

From the MeBadDev/PicoChessClock repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the PicoChessClock design in my own project?

The repository has no license, so all rights stay with MeBadDev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the PicoChessClock without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards