OpenKitten
medamap·OpenKitten·hardware/Rev-A01/OpenKitten_RevA01.kicad_pcb
About the OpenKitten PCB
OpenKitten is an open source PCB design by medamap, published on GitHub. It is a 4-layer board, with 25 components from 21 distinct parts.
Other key parts include the MP2161GJ-Z and TLV75518PDBVR. By type, the board carries 7 connectors, 7 resistors, 4 capacitors, 2 ICs, 2 switches and 2 diodes.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
OpenKitten: an AI-first open hardware and OS project for controllable ARM boards, including PureKitten (bare-metal oriented) and PoorDog (Android-oriented).
OpenKitten は「AI が設計、人間は部品を注文してハンダ付けするだけ」という方針で動く、オープンハードウェア / ファームウェア / OS コデザインプロジェクトです。
Raspberry Pi より制御性の高い ARM/FPGA ボードを、ハードウェア初心者でも作れるようにすること。
AI がアーキテクチャ設計・回路図・BOM・ファームウェア・ドキュメント一切を担当し、人間は物理作業(発注・ハンダ付け・計測)だけを行います。
PureKittenAlpha と PoorDog は 同じ PCB(キャリアボード)を共有します。ソフトウェアだけが異なります。
- Rev-A01 達成目標: LiteX BIOS 起動、DDR3 動作、HDMI 表示、PSG/OPM トーン再生、USB HID 認識 - 詳細仕様: requirements/PureKitten.base.yaml
Main components on the OpenKitten
OpenKitten bill of materials (BOM)
25 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MP2161GJ-Z MPS | SOT-23-6 | U1 |
| 1 | TLV75518PDBVR TI | SOT-23-5 | U2 |
| 1 | 2309409-1 VERDIN_IMX8M_MINI TE Connectivity | SODIMM-260-Verdin | J1 |
| 1 | PH-2X20-2.54 GPIO-40PIN-RPi Generic | PinHeader_2x20_P2.54mm_Vertical | J2 |
| 1 | PH-1X4-2.54 DEBUG-UART-1x4 Generic | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | USB-A-HOST Generic | USB_A_Receptacle_Amphenol_UE27AC0110_Horizontal | J4 |
| 1 | FPC-30P-0.5-H MIPI-DSI-FPC-30P Generic | Amphenol_RTZ050T30-T_1x30-1MP_P0.50mm_Horizontal | J5 |
| 1 | microSD-PUSH Generic | microSD_HC_Molex_502570-0893 | J6 |
| 1 | USB4105-GF-A USB-C-PWR-ONLY Generic | USB_C_Receptacle_GCT_USB4105-GF-A | J7 |
| 1 | SW-6X6 RESET Generic | SW_SPST_B3S-1000 | SW1 |
| 1 | SW-6X6 PWR-BTN Generic | SW_SPST_B3S-1000 | SW2 |
| 1 | LED-0603-G LED-GRN Generic | LED_0603_1608Metric | D1 |
| 1 | LED-0603-B LED-BLU Generic | LED_0603_1608Metric | D2 |
| 1 | IND-2.2UH 2.2uH/2A Generic | L_0603_1608Metric | L1 |
| 1 | C-0603-10UF 10uF/10V Generic | C_0603_1608Metric | C1 |
| 3 | 10uF/10V | C_0603_1608Metric | C2, C3, C4 |
| 1 | R-0603-10K 102k Generic | R_0603_1608Metric | R1 |
| 2 | 56.2k | R_0603_1608Metric | R2, R7 |
| 2 | 1k | R_0603_1608Metric | R3, R4 |
| 1 | 10k | R_0603_1608Metric | R5 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 100k | R_0603_1608Metric | R6 |
OpenKitten design files
The KiCad project lives in the medamap/OpenKitten repository on GitHub; these links point at the commit this page was built from.
OpenKitten: common questions
How big is the OpenKitten PCB?
The OpenKitten has 4 copper layers.
How many components are on the OpenKitten?
25 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the OpenKitten design files?
From the medamap/OpenKitten repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the OpenKitten design in my own project?
The repository has no license, so all rights stay with medamap. Use it as a reference, and ask the author before reusing the design.
Similar boards
Breakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kRj45 breakout
rene-dev
15.2 × 53.8 mm3 parts2LGPL-3.0979