12 open source boards using the TLV75518PDBVR
Real designs built with the TLV75518PDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Nest mini drop in
iMike78
74.5 × 70.6 mm243 parts4LCERN-OHL-S-2.0598RP2040/RP2350
Dev real
iamdarshg
105 × 105 mm310 parts4LNo license1Agilex3 control card
johonkanen
32.5 × 33.8 mm144 parts6LMIT0STM32
T1s
hwkim3330
58.4 × 11.8 mm83 parts6LNo license0Spi flash adapter v1
Spectating101
90 × 50 mm18 parts2LMIT0FlashCAT-P30-Header
brainstorm
51 × 37 mm15 parts4LNo license0- schematic only · 25 parts
OpenKitten
medamap
25 parts4LNo license0 RP2040/RP2350
Dev real production
iamdarshg
105 × 105 mm310 parts4LNo license1STM32
T1s panel
hwkim3330
70 × 81 mm83 parts6LNo license0Nose board
AndreiVladescu
60.3 × 28.8 mm33 parts4LCERN-OHL-S-2.00ESP32
Main ctrl esp32 servo
Spectating101
80 × 50 mm11 parts2LMIT0Microduck Audio MIC R3
ldcyes
20 × 14 mm10 parts2LNo license0
How designs wire the TLV75518PDBVR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the TLV75518PDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The EN_3 pin is tied to 3.3V on 7 of 7 designs.
- The IN_1 pin is tied to 3.3V on 6 of 7 designs.
- The NC_4 pin is left unconnected on 6 of 7 designs.
- The OUT_5 pin is tied to 1.8V on 6 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| IN_1pin 1 | Connected to: 3.3V 86% | — |
| GND_2pin 2 | Connected to: GND 86% | — |
| EN_3pin 3 | Connected to: 3.3V 100% | — |
| NC_4pin 4 | Connected to: Not connected 86% | — |
| OUT_5pin 5 | Connected to: 1.8V 100% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Nest mini drop in pcb by iMike78, Nose board by AndreiVladescu, FlashCAT-P30-Header by brainstorm and T1s by hwkim3330.
The TLV75518PDBVR in open source designs
The gallery holds 12 open source boards using the TLV75518PDBVR from 9 GitHub repositories; a typical one measures about 70 × 50 mm and carries around 58 components.
75% use four copper layers or more, and 42% carry an open source license.
The most starred is Nest mini drop in pcb by iMike78.
Parts used alongside the TLV75518PDBVR
Microcontrollers on boards using the TLV75518PDBVR
What boards using the TLV75518PDBVR are built for
TLV75518PDBVR: common questions
Where can I find a TLV75518PDBVR reference design?
Each of the 12 boards on this page is a real design using the TLV75518PDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TLV75518PDBVR EN_3 pin connected?
The EN_3 pin is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV75518PDBVR.
How is the TLV75518PDBVR IN_1 pin connected?
The IN_1 pin is tied to 3.3V on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV75518PDBVR.
How is the TLV75518PDBVR NC_4 pin connected?
The NC_4 pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the TLV75518PDBVR.
Which microcontrollers do boards using the TLV75518PDBVR use?
Most are built on ESP32 (2), RP2040/RP2350 (2) and STM32 (2).
How big is a typical board using the TLV75518PDBVR?
The median is 70 × 50 mm, and 25% are two-layer designs.
What is the most popular open source board using the TLV75518PDBVR?
By GitHub stars, Nest mini drop in pcb by iMike78, with 598 stars.
Can I simulate one of these boards using the TLV75518PDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.