Halflife w3
meeplabsdev·halflife-w3·piano/piano.kicad_pcb
About the Halflife w3 PCB
Halflife w3 is an open source RP2040/RP2350 PCB design by meeplabsdev, published on GitHub. It is a 4-layer board measuring 263 × 179 mm, with 25 components from 14 distinct parts.
Its main chip is the RaspberryPi_Pico, from the RP2040/RP2350 family. Other key parts include the CD4067BM96. By type, the board carries 12 ICs, 12 connectors and 1 module.
Main components on the Halflife w3
Halflife w3 bill of materials (BOM)
25 components, 14 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 12 | CD4067BM96 TI(德州仪器) | C6525_SOIC-24_L15_4-W7_5-P1_27-LS10_3-BL | U1, U2, U3, U4, U5, U6, U7, U8 +4 |
| 1 | RaspberryPi_Pico | RaspberryPi_Pico_Common_SMD | A1 |
| 1 | White1 | LeftKey | J1 |
| 1 | Black1 | BlackKey | J2 |
| 1 | White2 | MiddleKey | J3 |
| 1 | Black2 | BlackKey | J4 |
| 1 | White3 | RightKey | J5 |
| 1 | White4 | LeftKey | J6 |
| 1 | White5 | MiddleKey | J7 |
| 1 | Black3 | BlackKey | J8 |
| 1 | White6 | MiddleKey | J9 |
| 1 | Black4 | BlackKey | J10 |
| 1 | White7 | RightKey | J11 |
| 1 | Black5 | BlackKey | J12 |
Halflife w3 design files
The KiCad project lives in the meeplabsdev/halflife-w3 repository on GitHub; these links point at the commit this page was built from.
- Layoutpiano/piano.kicad_pcb
- Schematicpiano/piano.kicad_sch
Halflife w3: common questions
What microcontroller does the Halflife w3 use?
The Halflife w3 is built around the RaspberryPi_Pico, from the RP2040/RP2350 family.
How big is the Halflife w3 PCB?
The Halflife w3 measures 263 × 179 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Halflife w3?
25 components, from 14 distinct parts. The full bill of materials is listed on this page.
Where can I download the Halflife w3 design files?
From the meeplabsdev/halflife-w3 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Halflife w3 design in my own project?
The repository has no license, so all rights stay with meeplabsdev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Halflife w3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k