Arduino gps tracker

megasaturnv·arduino-gps-tracker·trackingDevice_circuitBoard/trackingDevice_circuitBoard.kicad_pcb

Simulate this board

About the Arduino gps tracker PCB

Arduino gps tracker is an open source PCB design by megasaturnv, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 50.8 × 45.7 mm, with 16 components from 11 distinct parts.

Other key parts include the HC-12, GY-NEO6MV2 and TP4056. By type, the board carries 7 resistors, 3 ICs, 3 transistors, 2 connectors and 1 battery holder.

It belongs with the displays & leds, rf & radio and iot & wireless designs in this gallery.

From the project

An Arduino-based GPS tracking solution. Uses one Arduino as the GPS tracker and the other to display the GPS location.

To be opened with KiCad EDA, a cross platform, free and open source electronics design automation suite. http://kicad-pcb.org/ https://github.com/kicad

Main components on the Arduino gps tracker

HC-12 GY-NEO6MV2 TP4056

Arduino gps tracker bill of materials (BOM)

16 components, 11 distinct parts.

Qty	Part	Footprint	Refs
1	HC-12	Socket_Strip_Straight_1x05_Pitch2.54mm	U1
1	GY-NEO6MV2	Socket_Strip_Straight_1x04_Pitch2.54mm	U2
1	TP4056	TP4056_with_protection	U3
3	Q_NPN_EBC	TO-92_Inline_Wide	Q1, Q2, Q3
1	Digital	Socket_Strip_Straight_1x12_Pitch2.54mm	P1
1	Analog	Socket_Strip_Straight_1x12_Pitch2.54mm	P4
1	Battery_Cell	CP_Axial_L67.0mm_D23.0mm_P75.00mm_Horizontal	BT1
1	10kR	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R1
1	47kR	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R2
4	27kR	R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal	R3, R4, R5, R6
1	4.7kR	R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal	R7

Arduino gps tracker design files

The KiCad project lives in the megasaturnv/arduino-gps-tracker repository on GitHub; these links point at the commit this page was built from.

LayouttrackingDevice_circuitBoard/trackingDevice_circuitBoard.kicad_pcb

Arduino gps tracker: common questions

How big is the Arduino gps tracker PCB?

The Arduino gps tracker measures 50.8 × 45.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Arduino gps tracker?

16 components, from 11 distinct parts. The full bill of materials is listed on this page.

Where can I download the Arduino gps tracker design files?

From the megasaturnv/arduino-gps-tracker repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Arduino gps tracker design in my own project?

Yes, under the terms of its GPL-3.0 license, which megasaturnv chose for the repository.

Similar boards