3 open source boards using the GY-NEO6MV2
Real designs built with the GY-NEO6MV2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32Noah hardware
GonzaCerv
120 × 100 mm122 parts2LMIT28
ESP32Lora node esp32 smd GPS
Christophe45
71.1 × 109.2 mm32 parts2LNo license14
Arduino gps tracker
megasaturnv
50.8 × 45.7 mm16 parts2LGPL-3.08
The GY-NEO6MV2 in open source designs
The gallery holds 3 open source boards using the GY-NEO6MV2 from 3 GitHub repositories; a typical one measures about 71.1 × 100 mm and carries around 32 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Noah hardware by GonzaCerv.
Parts used alongside the GY-NEO6MV2
What boards using the GY-NEO6MV2 are built for
GY-NEO6MV2: common questions
Where can I find a GY-NEO6MV2 reference design?
Each of the 3 boards on this page is a real design using the GY-NEO6MV2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the GY-NEO6MV2 use?
Most are built on ESP32 (1) and STM32 (1).
How big is a typical board using the GY-NEO6MV2?
The median is 71.1 × 100 mm, and 100% are two-layer designs.
What is the most popular open source board using the GY-NEO6MV2?
By GitHub stars, Noah hardware by GonzaCerv, with 28 stars.
Can I simulate one of these boards using the GY-NEO6MV2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.