Usb can rs485-dongle
Mehdi-Ldj·usb-can-rs485-dongle·hardware/rev-a/CAN485-dongle.kicad_pcb
About the Usb can rs485-dongle PCB
Usb can rs485-dongle is an open source STM32 PCB design by Mehdi-Ldj, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 73 × 33 mm, with 62 components from 31 distinct parts.
Its main chip is the STM32F072CBT6, from the STM32 family. Other key parts include the TLV75533PDBVR, ADM2582EBRWZ-REEL7, ADM3053BRWZ-REEL7, TPD4E05U06DQAR and SM712.TCT. By type, the board carries 30 capacitors, 13 resistors, 6 ICs, 5 diodes, 4 inductors and 2 connectors.
From the project
CAN-485 diagnostic gateway — rev A hardware
An isolated USB-C to RS-485 / CAN 2.0B diagnostic dongle for industrial and heavy-machinery bus work.
Read-only browser viewer — no KiCad installation required.
[kicanvas-sch]: https://kicanvas.org/?repo=https%3A%2F%2Fgithub.com%2FMehdi-Ldj%2Fusb-can-rs485-dongle%2Fblob%2Fmain%2Fhardware%2Frev-a%2FCAN485-dongle.kicadsch [kicanvas-pcb]: https://kicanvas.org/?repo=https%3A%2F%2Fgithub.com%2FMehdi-Ldj%2Fusb-can-rs485-dongle%2Fblob%2Fmain%2Fhardware%2Frev-a%2FCAN485-dongle.kicadpcb

Main components on the Usb can rs485-dongle
Usb can rs485-dongle bill of materials (BOM)
62 components, 31 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F072CBT6 STMicroelectronics | LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | TLV75533PDBVR Texas Instruments | SOT-23-5 | U2 |
| 1 | ADM2582EBRWZ-REEL7 Analog Devices | SOIC-20W_7.5x12.8mm_P1.27mm | U3 |
| 1 | ADM3053BRWZ-REEL7 Analog Devices | SOIC-20W_7.5x12.8mm_P1.27mm | U4 |
| 1 | TPD4E05U06DQAR Texas Instruments | USON-10_2.5x1.0mm_P0.5mm | U5 |
| 1 | SM712.TCT Semtech | SOT-23 | U6 |
| 1 | XC32M4-8.000-F18LJDT 8MHz HCI | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB4085-GF-A GCT | USB_C_Receptacle_GCT_USB4085_Left | J1 |
| 1 | DB2EVC-3.81-5P-GN DB2EVC-3.81-5P DORABO | DB2EVC-3.81-5P | J2 |
| 1 | MF-MSMF050-2 0.5A Bourns | Fuse_1812_4532Metric | F1 |
| 1 | SMAJ5.0A Littelfuse | D_SMA | D1 |
| 1 | LTST-C171KGKT Green Lite-On | LED_0805_2012Metric | D2 |
| 1 | LTST-C171KFKT Orange Lite-On | LED_0805_2012Metric | D3 |
| 1 | LTST-C171TBKT Blue Lite-On | LED_0805_2012Metric | D4 |
| 1 | NUP2105LT1G onsemi | SOT-23 | D5 |
| 2 | BLM18KG601SN1D Murata | L_0603_1608Metric | FB2, FB3 |
| 2 | ACT45B-510-2P-TL003 ACT45B-510-2P TDK | ACT45B-510-2P | L1, L2 |
| 2 | CL21A475KAQNNNE 4u7 Samsung | C_0805_2012Metric | C1, C2 |
| 5 | CL21A106KAYNNNE 10u Samsung | C_0805_2012Metric | C3, C22, C25, C28, C30 |
| 15 | CL05B104KO5NNNC 100n Samsung | C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C11, C16 +7 |
Show 11 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 0402B472K500NT 4n7 FH | C_0402_1005Metric | C12, C17 |
| 2 | CC0402JRNPO9BN300 30p YAGEO | C_0402_1005Metric | C13, C14 |
| 1 | CL05A105KA5NQNC 1u Samsung | C_0402_1005Metric | C15 |
| 3 | CL05B103KB5NNNC 10n Samsung | C_0402_1005Metric | C19, C21, C27 |
| 2 | 0402WGF220JTCE 22R UNI-ROYAL | R_0402_1005Metric | R1, R2 |
| 2 | 0402WGF5101TCE 5k1 UNI-ROYAL | R_0402_1005Metric | R3, R4 |
| 2 | 0402WGF1002TCE 10k UNI-ROYAL | R_0402_1005Metric | R5, R6 |
| 2 | ERJ3EKF60R4V 60R4 Panasonic | R_0603_1608Metric | R7, R8 |
| 1 | 0603WAF1200T5E 120R UNI-ROYAL | R_0603_1608Metric | R9 |
| 3 | 0402WGF1001TCE 1k UNI-ROYAL | R_0402_1005Metric | R10, R11, R14 |
| 1 | 0402WGF1004TCE 1M UNI-ROYAL | R_0402_1005Metric | R12 |
Usb can rs485-dongle design files
The KiCad project lives in the Mehdi-Ldj/usb-can-rs485-dongle repository on GitHub; these links point at the commit this page was built from.
Usb can rs485-dongle: common questions
What microcontroller does the Usb can rs485-dongle use?
The Usb can rs485-dongle is built around the STM32F072CBT6, from the STM32 family.
How big is the Usb can rs485-dongle PCB?
The Usb can rs485-dongle measures 73 × 33 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Usb can rs485-dongle?
62 components, from 31 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb can rs485-dongle design files?
From the Mehdi-Ldj/usb-can-rs485-dongle repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Usb can rs485-dongle design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which Mehdi-Ldj chose for the repository.
Can I test firmware for the Usb can rs485-dongle without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k