SmartPowerBank
mehmet-berke-bulbul·SmartPowerBank·hardware/kicad/SmartPowerBank/03_BMS_PROTECTION.kicad_sch
About the SmartPowerBank PCB
SmartPowerBank is an open source PCB design by mehmet-berke-bulbul, published on GitHub. It is a board, with 30 components from 15 distinct parts.
Other key parts include the BQ76907RGR. By type, the board carries 15 resistors, 9 capacitors, 2 transistors, 2 diodes, 1 IC and 1 fuse.
It belongs with the power & battery designs in this gallery.
From the project
Create the KiCad project here with this exact name:
Create the KiCad project here with this exact name:
Create these hierarchical schematic sheets:
1. 01USBCPD 2. 02BIDIRECTIONALCHARGER 3. 03BMSPROTECTION 4. 04BATTERYINTERFACE 5. 05STM32CONTROL 6. 06DISPLAYUI 7. 07TEMPERATURESENSING 8. 08DEBUGPROGRAMMING 9. 09TESTPOINTSANDSERVICE
Do not begin PCB placement until the schematic has passed ERC and the component decision log is updated.
Main components on the SmartPowerBank
SmartPowerBank bill of materials (BOM)
30 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | BQ76907RGR | VQFN20_RGR_TEX | U301 |
| 2 | N-MOSFET_60V_LOW_RDSon | Q301, Q302 | |
| 1 | 15A_DC_PROVISIONAL | F301 | |
| 2 | SCHOTTKY_40V | D301, D302 | |
| 3 | 220nF | C301, C302, C303 | |
| 3 | 1uF | C304, C305, C306 | |
| 1 | 470pF | C307 | |
| 1 | 100nF | C308 | |
| 1 | 100pF / DNP | C309 | |
| 4 | 10R | R301, R302, R303, R305 | |
| 3 | 100R | R304, R307, R308 | |
| 1 | 2mR_2W_50ppm | R306 | |
| 2 | 5.1kR | R309, R310 | |
| 2 | 10MR | R311, R312 | |
| 3 | 4.7kR | R313, R314, R315 |
SmartPowerBank design files
The KiCad project lives in the mehmet-berke-bulbul/SmartPowerBank repository on GitHub; these links point at the commit this page was built from.
SmartPowerBank: common questions
How many components are on the SmartPowerBank?
30 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SmartPowerBank design files?
From the mehmet-berke-bulbul/SmartPowerBank repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the SmartPowerBank design in my own project?
The repository has no license, so all rights stay with mehmet-berke-bulbul. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k