Power
melair·ktane·PCB/Modules/Power/Power.kicad_pcb
About the Power PCB
Power is an open source PCB design by melair, published on GitHub. It is a 2-layer board measuring 177.9 × 174.1 mm, with 23 components from 22 distinct parts.
Other key parts include the TPD2E2U06DCK and TPS629210. By type, the board carries 12 connectors, 3 resistors, 2 ICs, 2 battery holders, 2 diodes and 1 switch.
From the project
Keep Talking and Nobody Explodes - Physical Edition
This is version two of my Keep Talking and Nobody Explodes physical bomb, you may refer to the version-one branch if you wish to see the first version progress.
Main components on the Power
Power bill of materials (BOM)
23 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPD2E2U06DCK TPS25751D | Texas_REF0038A_WQFN-38-2EP_6x4mm_P0.4 | U3 |
| 1 | TPS629210 TVS2200DRV | WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm | U5 |
| 1 | Out1 | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J1 |
| 1 | 2223-UJ20-C-H-G-SMT-1A-P16 Out2 | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J2 |
| 1 | STOCK/HEADER USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_G-Switch_GT-USB-7051x | J3 |
| 1 | S9171 VBus | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J4 |
| 1 | S9171 VBus | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J5 |
| 1 | S9171 Comms | JST_PH_B8B-PH-SM4-TB_1x08-1MP_P2.00mm_Vertical | J6 |
| 1 | 2223-MSD-11-A Comms | JST_PH_B8B-PH-SM4-TB_1x08-1MP_P2.00mm_Vertical | J7 |
| 1 | 455-B3B-PH-SM4-TB Host | JST_PH_B6B-PH-SM4-TB_1x06-1MP_P2.00mm_Vertical | J8 |
| 1 | 455-B3B-PH-SM4-TB Battery | AMASS_XT30PW-F_1x02_P2.50mm_Horizontal | J9 |
| 1 | STOCK/AMASS Comms | JST_PH_B5B-PH-SM4-TB_1x05-1MP_P2.00mm_Vertical | J10 |
| 1 | Battery | AMASS_XT30PW-M_1x02_P2.50mm_Horizontal | J11 |
| 1 | Comms | JST_PH_B5B-PH-SM4-TB_1x05-1MP_P2.00mm_Vertical | J12 |
| 2 | ~ | 3Cell18650Holder | BT1, BT2 |
| 1 | CKN12220-1 Action | PTS526Sx15SMTR2xLFS | SW1 |
| 1 | T24CAN OK | LED_0603_1608Metric | D1 |
| 1 | 3147-B19Y1UYG-20C000313U1930 Fault | LED_0603_1608Metric | D2 |
| 1 | 1nF | C_0603_1608Metric | C1 |
| 1 | 1M | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | 4.7K 100 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
Power design files
The KiCad project lives in the melair/ktane repository on GitHub; these links point at the commit this page was built from.
Power: common questions
How big is the Power PCB?
The Power measures 177.9 × 174.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Power?
23 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Power design files?
From the melair/ktane repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Power design in my own project?
The repository has no license, so all rights stay with melair. Use it as a reference, and ask the author before reusing the design.
More boards in ktane
PullUpDown
melair
30 × 64 mm106 parts4LNo license5Timer
melair
114 × 74 mm95 parts2LNo license5STM32
ControlBoard
melair
98 × 58 mm88 parts4LNo license5STM32
Widget
melair
61 × 30 mm78 parts4LNo license5STM32
Backplane
melair
40 × 100 mm78 parts4LNo license5STM32
Comms
melair
50 × 50 mm54 parts4LNo license5Audio
melair
80 × 50 mm49 parts4LNo license5STM32
LCDDriver
melair
73.4 × 41 mm27 parts2LNo license5STM32
Strikes
melair
54 × 35 mm24 parts2LNo license5NeedyCountdown
melair
23 × 35 mm17 parts2LNo license5STM32
2FALCD
melair
65 × 20 mm12 parts2LNo license5