Comms
melair·ktane·PCB/Modules/Comms/Comms.kicad_pcb
About the Comms PCB
Comms is an open source STM32 PCB design by melair, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 54 components from 44 distinct parts.
Its main chip is the STM32H562VGT6, from the STM32 family. Other key parts include the MCP2562-E-SN and TPD2E2U06DCK. By type, the board carries 17 capacitors, 12 resistors, 11 connectors, 3 ICs, 3 diodes and 2 crystals.
From the project
Keep Talking and Nobody Explodes - Physical Edition
This is version two of my Keep Talking and Nobody Explodes physical bomb, you may refer to the version-one branch if you wish to see the first version progress.
Main components on the Comms
Comms bill of materials (BOM)
54 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32H562VGT6 STM32WB09KEVx | QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm | U1 |
| 1 | MCP2562-E-SN THVD1420D | SOT-583-8 | U2 |
| 1 | TPD2E2U06DCK MLPF-NRG-01D3 | MLPF-NRG-01D3 | U3 |
| 1 | Q_PMOS_GSD | SOT-23 | Q1 |
| 1 | 25MHZ 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y1 |
| 1 | 32.768k | Crystal_SMD_2012-2Pin_2.0x1.2mm | Y2 |
| 1 | In | PinHeader_2x08_P2.54mm_Vertical-Centered | J1 |
| 1 | 2223-UJ20-C-H-G-SMT-1A-P16 ANT | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J2 |
| 1 | STOCK/HEADER Bus | PinHeader_2x03_P2.54mm_Vertical-Centered | J3 |
| 1 | S9171 Bus | PinHeader_2x03_P2.54mm_Vertical-Centered | J4 |
| 1 | S9171 Shield | EMI_Shield_Corner | J6 |
| 1 | 2223-MSD-11-A Shield | EMI_Shield_Corner | J7 |
| 2 | 455-B3B-PH-SM4-TB Shield | EMI_Shield_Corner | J8, J9 |
| 1 | STOCK/AMASS 1PPS | U.FL_Hirose_U.FL-R-SMT-1_Vertical | J10 |
| 2 | Shield | EMI_Shield_Straight | J12, J13 |
| 1 | 2450AT18A0100001E | Johanson_2450AT18x100_2400-2500Mhz | AE1 |
| 1 | MR2032 | CellHolder | BT1 |
| 1 | CKN12220-1 Boot | PTS526Sx15SMTR2xLFS | SW1 |
| 1 | T24CAN BAT54S | SOT-23 | D1 |
| 1 | 3147-B19Y1UYG-20C000313U1930 Status | LED_0603_1608Metric | D3 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | T24CAN | SOT-23 | D6 |
| 1 | 2.2UH 10uH | L_0805_2012Metric | L1 |
| 1 | 2.2UH 22nH | L_0402_1005Metric | L2 |
| 2 | 0.1μF | C_0603_1608Metric | C2, C30 |
| 1 | 1276-1005-1 20pF | R_0402_1005Metric_Tweaked | C6 |
| 1 | 1276-1948-1 ~ | R_0402_1005Metric_Tweaked | C7 |
| 1 | 1276-1005-1 ~ | R_0402_1005Metric_Tweaked | C8 |
| 4 | 1276-1005-1 0.1μF | C_0603_1608Metric | C9, C23, C24, C26 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C25 |
| 1 | 2.2UF 100pF | C_0603_1608Metric | C27 |
| 2 | 2.2UF 0.1μF | C_0603_1608Metric | C28, C31 |
| 1 | 4.7uF | C_0603_1608Metric | C29 |
| 1 | 2.2UF 4.7uF | C_0603_1608Metric | C32 |
| 2 | 8pF | C_0603_1608Metric | C36, C41 |
| 1 | 430 | R_0603_1608Metric | R1 |
| 1 | 10K 120 | R_0603_1608Metric | R2 |
| 1 | 4.7K 430 | R_0603_1608Metric | R3 |
| 1 | 4.7K 0 | R_0402_1005Metric_Tweaked | R4 |
| 2 | 1000 0 | R_0402_1005Metric_Tweaked | R5, R6 |
| 1 | 10K 1000 | R_0603_1608Metric | R7 |
| 1 | 120 | R_0603_1608Metric | R8 |
| 1 | 10K 10k | R_0603_1608Metric | R9 |
| 2 | 5.1K 10k | R_0603_1608Metric | R10, R12 |
| 1 | 1000 51 | R_0603_1608Metric | R11 |
Comms design files
The KiCad project lives in the melair/ktane repository on GitHub; these links point at the commit this page was built from.
Comms: common questions
What microcontroller does the Comms use?
The Comms is built around the STM32H562VGT6, from the STM32 family.
How big is the Comms PCB?
The Comms measures 50 × 50 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Comms?
54 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Comms design files?
From the melair/ktane repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Comms design in my own project?
The repository has no license, so all rights stay with melair. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Comms without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in ktane
PullUpDown
melair
30 × 64 mm106 parts4LNo license5Timer
melair
114 × 74 mm95 parts2LNo license5STM32
ControlBoard
melair
98 × 58 mm88 parts4LNo license5STM32
Widget
melair
61 × 30 mm78 parts4LNo license5STM32
Backplane
melair
40 × 100 mm78 parts4LNo license5Audio
melair
80 × 50 mm49 parts4LNo license5STM32
LCDDriver
melair
73.4 × 41 mm27 parts2LNo license5STM32
Strikes
melair
54 × 35 mm24 parts2LNo license5Power
melair
177.9 × 174.1 mm23 parts2LNo license5NeedyCountdown
melair
23 × 35 mm17 parts2LNo license5STM32
2FALCD
melair
65 × 20 mm12 parts2LNo license5
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k