HardLabs

Kombo nrf24 stm32f0 min

MelexinVN·bs_kombo·hardware/pcb/kombo_nrf24_stm32f0_min/kombo_nrf24_stm32f0_min.kicad_pcb

Kombo nrf24 stm32f0 min PCB layout, top view — open source STM32 board by MelexinVN
Simulate this board

About the Kombo nrf24 stm32f0 min PCB

Kombo nrf24 stm32f0 min is an open source STM32 PCB design by MelexinVN, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 29.5 × 15.8 mm, with 18 components from 12 distinct parts.

Its main chip is the STM32F030F4PX, from the STM32 family. Other key parts include the NRF24L01_BREAKOUT and AMS1117-3.3. By type, the board carries 4 connectors, 4 capacitors, 4 resistors, 3 ICs, 2 jumpers and 1 diode.

It belongs with the iot & wireless designs in this gallery.

From the project

Открытые системы беспроводной коммуникации «КомБО» (Беспроводные системы «КомБО»). Проект с открытым программным и аппаратным обеспечением (Open source hardware). Open wireless communication systems "КомБО". Open source hardware project

Kombo nrf24 stm32f0 min, from the project README
From the project README

Main components on the Kombo nrf24 stm32f0 min

NRF24L01_BREAKOUTAMS1117-3.3STM32F030F4PX

Kombo nrf24 stm32f0 min bill of materials (BOM)

18 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NRF24L01_BREAKOUT
NRF24L01_Breakout
U1
1
AMS1117-3.3
U2
1
STM32F030F4PX
STM32F030F4Px
U3
1
CONN_01X02
Conn_01x02
J1
3
CONN_01X04
Conn_01x04
J2, J3, J4
2
SOLDERJUMPER_2_OPEN
SolderJumper_2_Open
JP1, JP2
1
1N4148W
D1
3
100N
100n
C2, C5, C6
1
10U
10u
C3
2
10K
10k
R1, R3
1
620
R2
1
4,7k
R4

Kombo nrf24 stm32f0 min design files

The KiCad project lives in the MelexinVN/bs_kombo repository on GitHub; these links point at the commit this page was built from.

Kombo nrf24 stm32f0 min: common questions

What microcontroller does the Kombo nrf24 stm32f0 min use?

The Kombo nrf24 stm32f0 min is built around the STM32F030F4PX, from the STM32 family.

How big is the Kombo nrf24 stm32f0 min PCB?

The Kombo nrf24 stm32f0 min measures 29.5 × 15.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Kombo nrf24 stm32f0 min?

18 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Kombo nrf24 stm32f0 min design files?

From the MelexinVN/bs_kombo repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Kombo nrf24 stm32f0 min design in my own project?

Yes, under the terms of its GPL-3.0 license, which MelexinVN chose for the repository.

Can I test firmware for the Kombo nrf24 stm32f0 min without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in bs_kombo

Similar boards