STM32F103-DEVBOARD

MertCubuk·STM32F103-DEVBOARD

STM32F103-DEVBOARD PCB layout, top view — open source STM32 board by MertCubuk

About the STM32F103-DEVBOARD PCB

STM32F103-DEVBOARD is an open source STM32 PCB design by MertCubuk, published on GitHub. It is a 2-layer board measuring 62.1 × 27.6 mm, with 42 components from 26 distinct parts.

Its main chip is the STM32F103C8Tx, from the STM32 family. Other key parts include the LD1117S33TR_SOT223. By type, the board carries 15 capacitors, 14 resistors, 5 connectors, 3 diodes, 2 ICs and 2 crystals.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

STM32F103C8T6 mikrodenetleyici tabanlı, breadboard uyumlu, USB destekli, RGB LED, SWD arayüzü, Boot jumperları, kristal osilatörler ve test noktaları içeren özel geliştirme kartı tasarımı.

Bu proje, STM32F103C8Tx mikrodenetleyicisi kullanılarak tasarlanmış breadboard uyumlu, çok amaçlı bir geliştirme kartının PCB tasarımıdır.

-STM32 donanım mimarisini derinlemesine öğrenmek

-Gömülü sistemler için profesyonel seviye bir geliştirme kartı oluşturmak

-Gerçek ürün geliştirme pratiği kazanmaktır

-STM32 clock yapısı (HSE + LSE) ve pin yönlendirme pratiği

STM32F103-DEVBOARD, from the project README
From the project README

Main components on the STM32F103-DEVBOARD

STM32F103-DEVBOARD bill of materials (BOM)

42 components, 26 distinct parts.

QtyPartRefs
1
LD1117S33TR_SOT223
U1
1
STM32F103C8Tx
U2
1
8MHz
Y1
1
32.768kHz
Y2
1
USB_B_Micro
J1
1
BOOTX
J2
1
SWD_CONN
J3
2
I/O_HEADER1
J4, J5
1
10K
RV1
1
D_Schottky
D1
1
LED
D2
1
CLX6F-FKC
D3
2
10uF
C1, C3
7
100nF
C2, C4, C7, C12, C13, C14, C15
2
1uF
C5, C6
2
20pF
C8, C9
2
6.8pF
C10, C11
1
100K
R1
2
20R
R2, R3
1
1K5
R4
Show 6 more
QtyPartRefs
2
470R
R5, R9
4
10K
R6, R8, R12, R13
1
1K
R7
1
150R
R10
1
100R
R11
1
1M
R14

STM32F103-DEVBOARD design files

The KiCad project lives in the MertCubuk/STM32F103-DEVBOARD repository on GitHub; these links point at the commit this page was built from.

STM32F103-DEVBOARD: common questions

What microcontroller does the STM32F103-DEVBOARD use?

The STM32F103-DEVBOARD is built around the STM32F103C8Tx, from the STM32 family.

How big is the STM32F103-DEVBOARD PCB?

The STM32F103-DEVBOARD measures 62.1 × 27.6 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32F103-DEVBOARD?

42 components, from 26 distinct parts. The full bill of materials is listed on this page.

Where can I download the STM32F103-DEVBOARD design files?

From the MertCubuk/STM32F103-DEVBOARD repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the STM32F103-DEVBOARD design in my own project?

The repository has no license, so all rights stay with MertCubuk. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32F103-DEVBOARD without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards