Vizitka usb Michal modra
About the Vizitka usb Michal modra PCB
Vizitka usb Michal modra is an open source AVR/Arduino PCB design by Meteopresscz, published on GitHub. It is a 2-layer board measuring 90 × 50 mm, with 81 components from 36 distinct parts.
Its main chip is the ATmega328P-AU, from the AVR/Arduino family. Other key parts include the DS18B20 and TPS54331. By type, the board carries 37 resistors, 15 diodes, 8 test points, 8 capacitors, 4 ICs and 4 transistors.
From the project
Design of our Business Cards and Note Pads on PCB
Main components on the Vizitka usb Michal modra
Vizitka usb Michal modra bill of materials (BOM)
81 components, 36 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328P-AU | TQFP-32_7x7mm_P0.8mm | U1 |
| 1 | DS18B20 | TO-92_HandSolder | U2 |
| 1 | DS18B20 | TO-92_Inline | U4 |
| 1 | TPS54331 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 4 | MMBT3904 | SOT-23 | Q1, Q3, Q5, Q11 |
| 1 | USB_B_Micro | PinHeader_2x03_P2.54mm_Vertical | J1 |
| 1 | USB_C_Receptacle | PCB-USB-C_straight | J2 |
| 1 | 0.5A | Fuse_1812_4532Metric | F1 |
| 1 | 1A | Fuse_1812_4532Metric | F5 |
| 1 | SCL | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | SDA | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 3 | GND | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP12, TP14, TP18 |
| 1 | PC0 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP27 |
| 1 | PC1 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP28 |
| 1 | PC2 | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP29 |
| 1 | LED | LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1 |
| 1 | D_Schottky | D_SMA | D6 |
| 1 | TVS | D_SMA | D8 |
| 12 | LED | D_0802_side_woSilk_C965872 | D101, D102, D103, D104, D105, D106, D107, D108 +4 |
| 1 | 47u | L_Bourns_SRP7028A_7.3x6.6mm | L1 |
Show 16 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 100n | C_0603_1608Metric | C9, C11 |
| 2 | 4u7/50V | C_1206_3216Metric | C12, C13 |
| 1 | 1u | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14 |
| 2 | 8.2n | C_0603_1608Metric | C15, C17 |
| 1 | 100n | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C16 |
| 2 | 330R | R_0603_1608Metric | R3, R6 |
| 1 | 150R | R_0603_1608Metric | R4 |
| 1 | 22k | R_0603_1608Metric | R5 |
| 3 | 4k7 | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R11, R14 |
| 3 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9, R22, R30 |
| 1 | 100R | R_0603_1608Metric | R12 |
| 1 | 1k8 | R_0603_1608Metric | R15 |
| 4 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R20, R24, R28, R40 |
| 7 | 47k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R21, R25, R26, R29, R37, R41, R42 |
| 12 | 120 | R_0201_woSilk | R101, R102, R103, R104, R105, R106, R107, R108 +4 |
| 2 | 5k1 | D_0402_woSilk | R142, R143 |
Vizitka usb Michal modra design files
The KiCad project lives in the Meteopresscz/PCB_Public repository on GitHub; these links point at the commit this page was built from.
Vizitka usb Michal modra: common questions
What microcontroller does the Vizitka usb Michal modra use?
The Vizitka usb Michal modra is built around the ATmega328P-AU, from the AVR/Arduino family.
How big is the Vizitka usb Michal modra PCB?
The Vizitka usb Michal modra measures 90 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Vizitka usb Michal modra?
81 components, from 36 distinct parts. The full bill of materials is listed on this page.
Where can I download the Vizitka usb Michal modra design files?
From the Meteopresscz/PCB_Public repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Vizitka usb Michal modra design in my own project?
The repository has no license, so all rights stay with Meteopresscz. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Vizitka usb Michal modra without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.
More boards in PCB_Public
AVR/ArduinoNotePad
151 × 212 mm155 parts2LNo license0
AVR/ArduinoVizitka usb Michal
90 × 50 mm78 parts2LNo license0
AVR/ArduinoVizitka usb Zuza
90 × 50 mm77 parts2LNo license0
AVR/ArduinoVizitka usb Michal pruhledna
90 × 50 mm69 parts2LNo license0
AVR/ArduinoVizitka usb ZuzaX
90 × 50 mm68 parts2LNo license0
AVR/ArduinoVizitka Michal 04
90 × 50 mm54 parts2LNo license0
AVR/ArduinoVizitka
90 × 50 mm53 parts2LNo license0
Vizitka usb experimental
90 × 50 mm39 parts2LNo license0
Similar boards
AVR/ArduinoMagspoof
samyk
35 × 29 mm11 parts2LNo license4.2k
AVR/ArduinoRedox keyboard
mattdibi
162.2 × 126.5 mm77 parts2LMIT2.0k
AVR/ArduinoLabrador
espotek-org
36.8 × 34.7 mm75 parts2LNo license1.2k
AVR/ArduinoV4
stuartpittaway
30 × 50 mm38 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoModuleV450
30 × 61.4 mm39 parts2LCC-BY-NC-4.01.1k
AVR/ArduinoDiscipline
coseyfannitutti
304.9 × 122.8 mm170 parts2LCC-BY-NC-4.01.0k