Uno toggle

Mhamednoui·PCB_Designer·projects/uno-toggle/uno-toggle.kicad_pcb

Uno toggle PCB layout, top view — open source AVR/Arduino board by Mhamednoui

About the Uno toggle PCB

Uno toggle is an open source AVR/Arduino PCB design by Mhamednoui, published on GitHub. It is a 2-layer board measuring 68.6 × 53.3 mm, with 9 components from 7 distinct parts.

Its main chip is the Arduino Uno R3, from the AVR/Arduino family. By type, the board carries 2 switches, 2 diodes, 2 capacitors, 2 resistors and 1 module.

From the project

AI-assisted KiCad PCB design pipeline: netlist -> schematic -> routed board -> fab files, with a 3D/simulation webview

Ordering it: everything a fab or price calculator asks (size in cm, layers, holes, parts, order-form answers) is in MANUFACTURING.md - generated from the real board, regenerate with python pipeline.py uno-toggle --only fabreport. Checking the wiring without reading a PCB: CONNECTIONS.md lists every pin of every part and where it goes, in words.

Two buttons, two LEDs, on an Arduino Uno R3 shield. Press a button → its LED toggles on; press again → off. Built end-to-end (design → fab → tests → live simulation in the webview) as the second real project in this workspace, and the first one built…

Main components on the Uno toggle

Uno toggle bill of materials (BOM)

9 components, 7 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Arduino Uno R3
A1
1
BTN1
SW1
1
BTN2
SW2
1
C2895470
RED
D1
1
GREEN
D2
2
100NF
100nF
C1, C2
2
330R
R1, R2

Uno toggle design files

The KiCad project lives in the Mhamednoui/PCB_Designer repository on GitHub; these links point at the commit this page was built from.

Uno toggle: common questions

What microcontroller does the Uno toggle use?

The Uno toggle is built around the Arduino Uno R3, from the AVR/Arduino family.

How big is the Uno toggle PCB?

The Uno toggle measures 68.6 × 53.3 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Uno toggle?

9 components, from 7 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Uno toggle design files?

From the Mhamednoui/PCB_Designer repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Uno toggle design in my own project?

The repository has no license, so all rights stay with Mhamednoui. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Uno toggle without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in PCB_Designer

Similar boards