PUEiE
Michal-Md·PUEiE
About the PUEiE PCB
PUEiE is an open source STM32 PCB design by Michal-Md, published on GitHub. It is a 2-layer board measuring 48.3 × 31.6 mm, with 56 components from 38 distinct parts.
Its main chip is the STM32WLE5C8Ux, from the STM32 family. Other key parts include the BMP280, SHT4x, INA180A1 and TPS62177DQC. By type, the board carries 28 capacitors, 9 resistors, 8 inductors, 5 ICs, 3 connectors and 2 crystals.
It belongs with the iot & wireless designs in this gallery.
From the project
IoT devices
Main components on the PUEiE
PUEiE bill of materials (BOM)
56 components, 38 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32WLE5C8Ux | QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm | U1 |
| 1 | BMP280 | Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering | U2 |
| 1 | SHT4x | Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad | U3 |
| 1 | INA180A1 | SOT-23-5 | U5 |
| 1 | TPS62177DQC | WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm_ThermalVias | U6 |
| 1 | 32.768kHz | Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering | Y1 |
| 1 | 32MHz | Crystal_SMD_2016-4Pin_2.0x1.6mm | Y2 |
| 1 | Conn_Coaxial | SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount | J1 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | BAT | TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal | J3 |
| 1 | BAT54S | SOT-23 | D1 |
| 1 | 9nH | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L1 |
| 1 | 3.3nH | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L2 |
| 1 | 8.2nH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L3 |
| 1 | 47nH | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L4 |
| 1 | 600R@100MHz | L_0603_1608Metric_Pad1.05x0.95mm_HandSolder | L5 |
| 1 | 15uH | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L6 |
| 1 | 10uH 124mOhm | L_TDK_SLF6025 | L7 |
| 1 | 3.9nH | L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | L8 |
| 2 | 6.8pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
Show 18 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.3pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C3 |
| 3 | 33pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4, C9, C15 |
| 1 | 4pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 7.5pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C6 |
| 1 | 0.7pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C7 |
| 2 | 2.2pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C8, C10 |
| 1 | 68pF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11 |
| 1 | 47nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C12 |
| 3 | 4.7uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C13, C17, C19 |
| 7 | 100nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C14, C16, C18, C20, C22, C23, C24 |
| 1 | 470nF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C21 |
| 1 | 22uF 1mOhm | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C25 |
| 1 | 2.2uF 9mOhm | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C26 |
| 2 | 33pF 0 Ohm | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C27, C28 |
| 3 | 0 Ohm | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R8, R9 |
| 2 | 10k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2, R3 |
| 3 | 100k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4, R5, R6 |
| 1 | 200k | R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
PUEiE design files
The KiCad project lives in the Michal-Md/PUEiE repository on GitHub; these links point at the commit this page was built from.
- LayoutIoT.kicad_pcb
- SchematicIoT.kicad_sch
- BOMIoT-bom.csv
PUEiE: common questions
What microcontroller does the PUEiE use?
The PUEiE is built around the STM32WLE5C8Ux, from the STM32 family.
How big is the PUEiE PCB?
The PUEiE measures 48.3 × 31.6 mm, has 2 copper layers and is 1.59 mm thick.
How many components are on the PUEiE?
56 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the PUEiE design files?
From the Michal-Md/PUEiE repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the PUEiE design in my own project?
The repository has no license, so all rights stay with Michal-Md. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the PUEiE without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k